text.skipToContent text.skipToNavigation
167 Results for: Bin Picking
Filter your result according to the following criteria:
Products
  • 1(current)
  • 2
  • 3
  • ...
  • 9
Go to Page
Applications
Websites
More Performance, Intuitive Operation, More Variety
In mid-September, wenglor sensoric released 19 new models of the C5PC series of 1D/2D code scanners, once again expanding its portfolio with more powerful and easy-to-operate code scanners. The simple installation via Plug & Play in particular, as well as the intuitive, browser-based WebLink user interface or the uniform interface concept across all scanners, open up a large number of new application solutions for users. The WebLink user interface pre-installed in each scanner guides users to install and set up the scanners, even without any programming knowledge. The decoding of codes can be started directly after the IP address has been entered. The scanners can be easily integrated into systems thanks to the available interfaces such as digital IOs, RS-232, Ethernet TCP/IP, PROFINET and EtherNet/IP TM . “With all 19 new scanner models, ease of initial start-up and networking are the two biggest advantages for users”, explains wenglor product manager Stefan Winkler. The Right (Hardware) Solution for Every Application From now on, the C5PC series will be available in variants with static focus or auto-focus, with resolutions of 0.3 megapixels, 1.2 megapixels or 5 megapixels and with optics in SD, HD or LR. There are seven different focal distances between 50 and 1,200 mm. With these hardware combinations, 1D and 2D codes can be read and decoded reliably, even if they have been printed, needle punched or lasered directly onto the object (also called DPM, Direct Part Marking). “With the new scanner portfolio, we have a suitable product for every customer requirement”, says Winkler. “From simple static applications with high contrasts, simple and complete codes to dynamic applications with high object speeds and very small, complex and sometimes incomplete or damaged codes, we can now take care of any task – with 25 percent higher reading performance than before”. Quality Standards, Daisy Chain and Tamper Protection Round Off the Portfolio All common standards for determining code quality are met with the scanners: ISO/IEC TR 29158 and EN 15415, EN 15416 and EN 16022. With CodeScan 360, up to eight scanners can be connected via daisy chain, providing a 360° visual field. This means that several scanners can be arranged in a circle around an object and connected together, for example. The code on the object is safely decoded by one of the scanners in the system, regardless of its position. “The advantage for users is not only secure all-round detection, but also that the configuration and results are managed as if it were just a single scanner”, says Winkler. The scanners can also be password-protected for protection against manipulation. Different user roles and levels are available here in WebLink. “The new Multishot Configuration Database is also located in WebLink. Here, users can select different configurations stored in the integrated database, after which the scanner automatically performs quick multiple scans at different positions as well as at different heights and brightness levels. The scanner processes these and evaluates them simultaneously. Users save manual programming effort and thus a lot of time! All in all, the new generation is even stronger, offers more practical features than ever before and is even easier to use”, says Winkler. The Highlights at a Glance Browser-based interface WebLink Easy installation thanks to Plug & Play Consistent interface concept (digital IOs, RS-232, Ethernet TCP/IP, PROFINET, EtherNet/IP TM ) 360° decoding with CodeScan 360 19 new models available 25% higher read performance Compliance with standards to determine code quality: ISO/IEC TR 29158, EN 15415, EN 15416, EN 16022 Protection against manipulation thanks to password protection  
>
VisionSystem2D: The Image Processing Solution
A Complete Modular System Including Camera and Illumination, Right on Up to Analysis Module (IPC) and Software wenglor’s new VisionSystem2D is a modular image processing system which has been developed for all vision applications. It consists of up to 16 digital cameras, lenses with various fixed focal lengths, external illumination components and a control unit (IPC) with all common standard interfaces, as well as software for image evaluation. The components of this modular system can be individually combined and adapted to the respective application. In this way, focal length, focusing, resolution, lighting and type of evaluation can be separately selected. uniVision software is used to configure parameters for image recording, and for subsequent image analysis. The Hardware Up to 16 digital cameras with integrated image chips from Sony’s Pregius series deliver high-resolution images with 1.6 or 5 MP in color or monochrome – even in dynamic applications. Thanks to the compact housing (29 x 29.1 x 29 mm), they’re ideal for installation in systems with limited space. Any desired C-mount lenses can be attached to the digital cameras, in order to implement applications in both close-up and distant ranges. Three different types of illumination can be selected for homogenous, constant lighting within the application. Ring lights, spotlights and backlights are available in different sizes and colors: red and infrared light in flash or continuous mode are offered in addition to white light. And last but not least, all of the image data generated by the system come together in the control unit: all processing is conducted and results are evaluated in the fanless housing (passive cooling). Equipped as desired with either an i3 or an i7 processor, up to 16 devices can be connected. uniVision Software, which is preinstalled on the control unit, is used for image evaluation. Interfaces and Visualization Whether digital IOs, Gigabit Ethernet over TCP/IP and UDP or the LIMA protocol based on XML is required – communication can be implemented with the most up-to-date technologies. Being able to individually configure visualization regardless of the platform is also advantageous for the user. Thanks to the integrated web server, the results can be displayed in the browser of any desired device – regardless of whether a Windows, Mac or Android operating system is used! In this way, for example, users can display camera images, scanned codes and the statuses of inputs and outputs at a graphic user interface. The software is easy to use thanks to free tutorials and templates. It covers a great variety of standard applications with just a few clicks. Thanks to scalable hardware and software, any conceivable settings can be implemented for expert users. Easy Changeover: A Single Software Package, Three Hardware Families uniVision all-in-one software isn’t just compatible with the new VisionSystem2D, but rather with the weQube smart camera and weCat3D 2D/3D profile sensors as well. Universal uniVision software can even be taken advantage of by users who want to measure height profiles in addition to running simple and complex image processing applications.
>
  • 1(current)
  • 2
  • 3
  • ...
  • 4
Go to Page
Downloads
Technical Glossary
Product Comparison
3/4
4/4
5/4
6/4