text.skipToContent text.skipToNavigation

Downloads

This section contains documents and information on our General Terms and Conditions, returns, material resistance and release lists as well as certificates and documents for all relevant standards. Technical data, data sheets and operating instructions for our products can be downloaded from the respective product detail pages.
Control Unit Firmware 2.6.0
Control Unit Firmware 2.6.0 (324 MB)

The firmware file can be used to extend the control unit’s range of functions. The file also contains bug fixes and performance optimizations.

Software uniVision 2.6.0
Software uniVision 2.6.0 (207 MB)

The control unit, the weQube Smart Camera, and the weCat3D smart 2D/3D profile sensors can be installed with uniVision software.
Important information for Windows® 10: this system is supported up to the 2004 version.

weQube Firmware 2.6.0
weQube Firmware 2.6.0 (38 MB)

The firmware file can be used to extend the range of functions of the weQube Smart Camera. The file also contains bug fixes and performance optimizations.

weCat3D Manual
weCat3D Manual (8 MB)
This manual provides more detailed information on the 2D/3D Profile Sensors weCat3D.
SDK Windows Linux weCat3D
SDK Windows Linux weCat3D (200 MB)

In order to assure simple system integration, wenglor offers a software development kit (SDK) for all weCat3D sensors, which can be downloaded free of charge.

The software consists of:

  • DLL/Shared Library
  • Interface Description
  • Programming Examples
  • Development Environments
GigE Vision Interface
GigE Vision Interface (12 MB)

The GigE Vision interface for all weCat3D sensors allows maximum degrees of freedom in the integration and evaluation of the sensors. The profiles generated by the 2D/3D sensors can be evaluated using GigE Vision as well as third-party software such as Matrox Imaging, Halcon, LabVIEW or EyeVision.

Examples of use are provided here.

GigE Vision Interface
GigE Vision Interface (12 MB)

The GigE Vision interface for all weCat3D sensors allows maximum degrees of freedom in the integration and evaluation of the sensors. The profiles generated by the 2D/3D sensors can be evaluated using GigE Vision as well as third-party software such as Matrox Imaging, Halcon, LabVIEW or EyeVision.

Examples of use are provided here.

weCat3D Firmware 2.3.0
weCat3D Firmware 2.3.0 (245 MB)

 

  • Firmware for all weCat3D Sensors with Integrated uniVision (smart function)
  • Sensor and analysis module in one. Profiles and analysis can be directly recorded in the smart weCat3D profile sensor, without additional IPC
Control Unit Firmware 2.5.1
Control Unit Firmware 2.5.1 (297 MB)

The firmware file can be used to extend the control unit’s range of functions. The file also contains bug fixes and performance optimizations.

weQube Firmware 2.5.1
weQube Firmware 2.5.1 (38 MB)

The firmware file can be used to extend the range of functions of the weQube Smart Camera. The file also contains bug fixes and performance optimizations.

Go to Page
Product Comparison