text.skipToContent text.skipToNavigation
  • MultiCore technology
  • Reading of printed and directly marked 1D and 2D codes

C50C101 1D/2D Code Scanner

available from stock
The scanner weQubeDecode is based on the wenglor MultiCore technology. Omnidirectional scanning enables decoding of printed, needle-punched, laser-engraved or etched codes on various materials in any orientation. Good scanning results are even obtained with poor code quality. In addition to the established 1D codes it is also suitable for scanning various 2D codes. A list of readable code types is found in the operating instructions.
Optical Data
Working Range  ≥ 20 mm
Resolution 736 × 480 Pixel
Image Chip monochrome
Light Source Infrared Light
Service Life (T = +25 °C) 100,000 h
Visual Field see Table 1
min. Resolution 0.1 mm
Barcode Printing Contrast > 15 %
Electrical Data
Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 200 mA
Scan Rate 20 scans/sec
Temperature Range -25 ... 55 °C*
Inputs/Outputs 6
Switching Output Voltage Drop < 2.5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Interface RS-232/Ethernet
Protection Class III
Mechanical Data
Setting Method Ethernet
Housing Material Aluminum
Degree of Protection IP67
Connection M12 × 1; 12-pin
Type of Connection Ethernet M12 × 1; 8-pin, X-cod.
Safety-relevant Data
MTTFd (EN ISO 13849-1) 230.41 a
General Data
Web server yes
1D and 2D code reading yes
PNP NO yes
Illumination Output yes
RS-232 Interface yes
Ethernet yes
EtherNet/IP™ yes
Adjustable parameters
Output Push-pull
Circuit NC
Standards and certificates
B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
Display brightness may decrease with age. This does not result in any impairment of the sensor function. * –25 °C: Ambient conditions should not result in condensation; avoid the formation of ice on the front panel! 55 °C: Continuous illumination at max. 1% or flash mode at 100% brightness with an exposure time of <= 5 ms; may affect the service life of the product.
Table 1
Working Distance 20 mm 100 mm 200 mm
Visual Field 24 × 16 mm 74 × 48 mm 145 × 94 mm
Connection Diagram
Scanning Field Table
AK = Outer Edge
IK = Inner Edge
LA = Read Range
SB = Scan Width
TSA = Depth of Focus Outer Edge
TSI = Depth of Focus Inner Edge
Ctrl. Panel
20 = Enter key
22 = Up key
23 = Down key
60 = display
Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937")
Complementary Products
  • Disk with Polarization Filter ZNNG004
  • Protective Housing ZNNS001, ZNNS002
  • Illumination Technology
  • weQubeOCR License Upgrade DNNL003
  • weQubeVision License Upgrade DNNL001
  • Software
Operating instructions
Quick-start guide
General instructions
General instructions
Change_IP_adress_Windows7-10.pdf DNNF020.pdf
Example_Omron_EtherNetIP_weQube_1.0.0.zip Example_Rockwell_EtherNetIP_weQube_1.0.0.zip Example_Rockwell_TCP_UDP_uniVision_1.0.0.zip Example_TIA_PROFINET_weQube_1.0.0.zip Example_TIA_TCP_UDP_uniVision_1.0.0.zip Example_TwinCAT3_EtherNETIP_weQube_1.0.0.zip Example_TwinCAT3_PROFINET_weQube_1.0.0.zip Example_TwinCAT3_TCP_UDP_uniVision_1.0.0.zip Firmware_weQube_2.4.1.tgz Software_uniVision_2.4.1.exe
Product description file
Product description file
EDS_C50C101.zip GSDML_C50C101.zip
Interface protocol
Interface protocol
Interface_Protocol_DNNFxxx_LIMA.pdf Interface_Protocol_DNNFxxx_TCP_UDP.pdf Interface_Protocol_weQube_EtherNetIP.pdf Interface_Protocol_weQube_Profinet.pdf
EU Declaration of Conformity
Product certificates
Product certificates
Product Comparison