text.skipToContent text.skipToNavigation

U1KT001 Distance Sensor

available from stock
These ultrasonic sensors evaluate the sound reflected from the object. They detect almost any object regardless of the material and its condition. They are therefore especially well suited for monitoring fill levels of liquids and bulk goods and for detecting transparent objects. The measured value can be read out via IO-Link, and the sensor can be optimally adapted to the application. The sensor can be used in reflex mode operation and as an ultrasonic through-beam sensor.

Ultrasonic Data

Working range, reflex sensor 30 ... 400 mm
Working range, through-beam sensor 1 ... 800 mm
Setting Range 30 ... 400 mm
Reproducibility maximum 4 mm
Linearity Deviation 4 mm
Resolution 0.5 mm
Ultrasonic Frequency 325 kHz
Opening Angle < 12 °
Service Life (T = +25 °C) 100,000 h
Switching Hysteresis 2 mm
Switching Hysteresis 1 % *

Electrical Data

Supply Voltage 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 20 mA
Switching frequency, reflex sensor 30 Hz
Switching frequency, through-beam sensor 70 Hz
Response time, reflex sensor 17 ms
Response time, through-beam sensor 8 ms
Temperature Range -30 ... 60 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 2.5 V
Switching Output/Switching Current 100 mA
Synchronous Mode up to 40 sensors
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Lockable yes
Interface IO-Link V1.1
Data Storage yes
Protection Class III

Mechanical Data

Setting Method Teach-In
Housing Material Plastic
Degree of Protection IP68
Connection M8 × 1; 4-pin

Safety-relevant Data

MTTFd (EN ISO 13849-1) 1,106.71 a

Output

PNP NO yes
Programmable error output yes
IO-Link yes

Adjustable parameters

Output NPN
PNP
Error Output
Circuit NC
NC/NO
NO
Other parameters Filter
Adjustable sonic cone
Adjustable sensor mode
Teach mode
Through-beam mode
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
* Referring to the switching distance, at least 2 mm.

Connection Diagram

Characteristic response curve

Characteristic curves show the position of the center of the measured object (100 × 100 mm plate) at the time of switching.
Ob = Object
Sc = Sonic cone width
Standard
Narrow
Characteristic response curve
Characteristic curves show the position of the center of the measured object (Ø 25 mm rod) at the time of switching.
Ob = Object
Sc = Sonic cone width
Standard
Narrow

Ctrl. Panel

06 = Teach Button
5a = Switching Status Display, O1
68 = supply voltage indicator
6a = Switching Status Display, O2

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Sensing Face Screw M3 = 0,5 Nm

Complementary Products

  • IO-Link Master
  • Software
Initial start-up instructions
Operating instructions
Quick-start guide
Product description file
Product description file
IODD_U1KT001_V1.1.zip
Interface protocol
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_U1KTxxx.pdf
Declarations of Conformity / Approvals
Product certificates
Product certificates
U1KT001_002_IO-Link_V1.1_Manufacturer_declaration.pdf
Product Comparison