ZH8C001 Immersion Sleeve for 75 mm G1/2" sensor
This immersion sleeve is equipped with a G½" process connection with hygienic design and is suitable for G½" temperature sensors.
Mechanical Data | |
|---|---|
| Height | 88.5 mm |
| Diameter | 8 mm |
| Pressure Resistance | > 300 bar * |
| Material | Stainless steel, V4A (1.4404 / 316L) |
| Immersion sleeve process connection | G 1/2" hygienic design |
| Process connection for sensor | G 1/2" |
| Sensor probe length | 75 mm |
| Sleeve immersion length | 38.5 mm |
| T90 response delay | < 1 s |
| Sensor tightening torque | max. 15 Nm |
| Immersion sleeve tightening torque | 15 Nm |
| Weight | 227 g |
General Data | |
|---|---|
| Packaging unit | 1 Piece |
| Hygienic Design | X |
* Tested without rupturing at a peak pressure of 600 bars at 200 °C
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
|
