wenglor uniVision 3 – Parameterization Meets Programming
uniVision 3 is a modular software platform for configuring wenglor machine vision products for solving tasks in the field of industrial image processing. The data evaluation can be flexibly designed via a graphical user interface to individually solve a wide range of tasks such as identification using codes and plain text, completeness checks or position detection. uniVision 3 offers both classic image processing algorithms and AI tools.
In addition to simple parameterization, programming is also possible by integrating HALCON scripts from MVTec’s HDevelop software. In addition, AI models can be imported and executed directly – regardless of whether they are trained in the wenglor AI Lab or created elsewhere.
Everything in a Single Software
Standard Software
- The finished vision application can be created in just a few steps thanks to the combination of rule-based tools and AI models
- Reduced support, training and induction effort thanks to Teach+, extensive documentation, tutorials and remote support
- Modular, flexible and expandable software – configurable, programmable and trainable
Extremely User-Friendly
- Quick and easy setup
- Low-code software – no programming knowledge required for simple parameterization tasks
- Templates, assistant and tutorials make operation easier
- Teach+ function enables location- and time-independent job setup and optimization
Diverse Algorithms
- Modular design of the software with toolbox for 2D image processing and profile evaluation
- Individual design of uniVision jobs with freely combinable modules
- Any combination of rule-based image processing tools with AI models
- All algorithms run on different platforms
Numerous Interfaces
- Fast integration thanks to standard interfaces for control, robot and network communication
- Import function of AI models enables the execution of own AI models and AI models trained in the AI Lab
- Program examples for robots and PLCs show practice-oriented integration options
- Robotics interfaces support direct communication with robots for robotic vision or robot weld seam tracking
The Advantages of wenglor uniVision 3 Image Processing Software
Intuitive Parameterization Software for Solving Complex Image Processing Applications
- Modules for rule-based and AI-based image processing
- Templates for simple standard tasks – the most important modules are saved and linked in the template job to reduce complexity and initial start-up time
- Fast and flexible application solution without programming knowledge for simple standard tasks – parameterization knowledge and basic image processing knowledge are sufficient
- Easy operation via drag & drop and adjustable parameters
- AI models can be directly integrated and executed
Image and Profile Evaluation in One Software
- Image and profile evaluation combined in one software
- Versatile modules for image and profile evaluation
- Uniform operability for machine vision cameras and 2D/3D profile sensors
AI with uniVision 3
For AI applications, uniVision 3 offers two powerful options: The “Image ONNX” module allows the execution of self-trained AI models in ONNX format directly on the uniVision 3 hardware. AI models trained in the AI Lab can be used via the “Image AI” module. Both variants enable the seamless integration of artificial intelligence into existing jobs – without the need for programming.
Comprehensive Toolbox for Individual Job Design
- Modules can be used flexibly thanks to individual arrangement and linking of data in the job
- Combination of rule-based and AI-based modules possible to solve complex applications
- The same modules can be used on different platforms
- uniVision Assistant supports the setup of the most important modules
- 1D code, 2D code, image-based pattern matching and deep OCR modules use the high-performance HALCON image processing library
- Expandable by programming with HALCON Script thanks to integrated HDevEngine
VisionApp 360 – All-Round Precise Profile Recording
Common Industrial Interfaces for Easy Integration
BOSCH Nexeed Automation
Flexibly Adjustable Web-Based Visualization
- Results are displayed directly in the image, e.g. as an overlay
- Results can be displayed on any device with a browser, regardless of platform
- Individually adjustable visualization according to the requirements of the machine operators
- Ready-made visualizations available for each template
Simple Initial Start-Up and Readjustment via uniVision Simulator
- Various good and bad images recorded with the uniVision product in a Teach+ file
- Test and simulation of the Teach+ file in the uniVision Simulator – without network connection (offline) or interruption of the system
- Easy expansion of good and bad data, e.g. with other Teach+ files
- Optimized job loaded onto the uniVision product – quickly and easily
wenglor uniVision 3 – High-Performance Modules and Functions
Compatible Hardware
wenglor uniVision 3 with Smart Camera B60
Software Packages B60
The overview shows the modules included in the respective license package in blue; modules that are not included in the license package are shown in gray.
Preprocessing
Image Calibration
Use this module to calibrate the camera image and to get mm values out of pixel values.
Image Region
Use this module to select only a part of the image as region of interest. The area can be created individually by rectancles, circles and polygons.
Image Manipulation
This module can be used to crop and rotate the image as well as adjust the aspect ratio.
Image Filter
Use this module to highlight or suppress certain image characteristics.
Image Locator
Use this module for detecting or tracking objects by feature points. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Pattern Match
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module for detecting or tracking objects by pattern match. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Coordinate System
Use this module for tracking an object by creating the coordinate system in a flexible way.
Processing
Image Threshold
Use this module to transform a grey image in a binary image. Pixels with grey values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple presence check is possible.
Image Threshold HSV
Use this module to transform HSV images (hue, saturation, value) in binary images. Pixels with values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple color check is possible.
Image Blob
Use this module to detect, count and sort objects. Associated white pixels in a binary image with certain criterias like size are considered as one object.
Image Comparison
Use this module to compare images with a reference image. It is necessary to teach a reference image. The following images are compared with the reference.
Image Measure
Use this module to find lines, circles or arcs or to find segments on lines, circles or arcs. With the found elements it is possible to measure angles, distances or to find special points.
Image OCR
Use this module to read letters, numbers or symbols.
Deep OCR
This module is not included in the uniVision license package. It is available from the uniVision Extended license package.
This module reads letters and numbers using deep learning methods. Compared to rule-based OCR methods, Deep OCR is based on pre-trained neural networks, which greatly increases the accuracy of text recognition.
Image ONNX
This module is included in the uniVision AI license package.
This module can be used to import and run ONNX models.
Image AI
This module is included in the uniVision AI license package.
With this module, training images can be transferred directly to the AI Lab and AI models can be loaded from the AI Lab and executed in uniVision.
Image Code 1D
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module to read all common 1D codes.
Image Code 2D
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module to read all common 2D codes.
HALCON Script
This module is not included in the uniVision license package. It is available as of the uniVision Script package.
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
Preprocessing
Image Calibration
Use this module to calibrate the camera image and to get mm values out of pixel values.
Image Region
Use this module to select only a part of the image as region of interest. The area can be created individually by rectancles, circles and polygons.
Image Manipulation
This module can be used to crop and rotate the image as well as adjust the aspect ratio.
Image Filter
Use this module to highlight or suppress certain image characteristics.
Image Locator
Use this module for detecting or tracking objects by feature points. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Pattern Match
Use this module for detecting or tracking objects by pattern match. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Coordinate System
Use this module for tracking an object by creating the coordinate system in a flexible way.
Processing
Image Threshold
Use this module to transform a grey image in a binary image. Pixels with grey values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple presence check is possible.
Image Threshold HSV
Use this module to transform HSV images (hue, saturation, value) in binary images. Pixels with values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple color check is possible.
Image Blob
Use this module to detect, count and sort objects. Associated white pixels in a binary image with certain criterias like size are considered as one object.
Image Comparison
Use this module to compare images with a reference image. It is necessary to teach a reference image. The following images are compared with the reference.
Image Measure
Use this module to find lines, circles or arcs or to find segments on lines, circles or arcs. With the found elements it is possible to measure angles, distances or to find special points.
Image OCR
Use this module to read letters, numbers or symbols.
Deep OCR
This module reads letters and numbers using deep learning methods. Compared to rule-based OCR methods, Deep OCR is based on pre-trained neural networks, which greatly increases the accuracy of text recognition.
Image ONNX
This module is included in the uniVision AI license package.
This module can be used to import and run ONNX models.
Image AI
This module is included in the uniVision AI license package.
With this module, training images can be transferred directly to the AI Lab and AI models can be loaded from the AI Lab and executed in uniVision.
Image Code 1D
Use this module to read all common 1D codes.
Image Code 2D
Use this module to read all common 2D codes.
HALCON Script
This module is not included in the uniVision license package. It is available as of the uniVision Script package.
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
Preprocessing
Image Calibration
Use this module to calibrate the camera image and to get mm values out of pixel values.
Image Region
Use this module to select only a part of the image as region of interest. The area can be created individually by rectancles, circles and polygons.
Image Manipulation
This module can be used to crop and rotate the image as well as adjust the aspect ratio.
Image Filter
Use this module to highlight or suppress certain image characteristics.
Image Locator
Use this module for detecting or tracking objects by feature points. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Pattern Match
Use this module for detecting or tracking objects by pattern match. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Coordinate System
Use this module for tracking an object by creating the coordinate system in a flexible way.
Processing
Image Threshold
Use this module to transform a grey image in a binary image. Pixels with grey values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple presence check is possible.
Image Threshold HSV
Use this module to transform HSV images (hue, saturation, value) in binary images. Pixels with values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple color check is possible.
Image Blob
Use this module to detect, count and sort objects. Associated white pixels in a binary image with certain criterias like size are considered as one object.
Image Comparison
Use this module to compare images with a reference image. It is necessary to teach a reference image. The following images are compared with the reference.
Image Measure
Use this module to find lines, circles or arcs or to find segments on lines, circles or arcs. With the found elements it is possible to measure angles, distances or to find special points.
Image OCR
Use this module to read letters, numbers or symbols.
Deep OCR
This module reads letters and numbers using deep learning methods. Compared to rule-based OCR methods, Deep OCR is based on pre-trained neural networks, which greatly increases the accuracy of text recognition.
Image ONNX
This module is included in the uniVision AI license package.
This module can be used to import and run ONNX models.
Image AI
This module is included in the uniVision AI license package.
With this module, training images can be transferred directly to the AI Lab and AI models can be loaded from the AI Lab and executed in uniVision.
Image Code 1D
Use this module to read all common 1D codes.
Image Code 2D
Use this module to read all common 2D codes.
HALCON Script
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
Preprocessing
Image Calibration
Use this module to calibrate the camera image and to get mm values out of pixel values.
Image Region
Use this module to select only a part of the image as region of interest. The area can be created individually by rectancles, circles and polygons.
Image Manipulation
This module can be used to crop and rotate the image as well as adjust the aspect ratio.
Image Filter
Use this module to highlight or suppress certain image characteristics.
Image Locator
Use this module for detecting or tracking objects by feature points. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Pattern Match
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module for detecting or tracking objects by pattern match. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Coordinate System
Use this module for tracking an object by creating the coordinate system in a flexible way.
Processing
Image Threshold
Use this module to transform a grey image in a binary image. Pixels with grey values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple presence check is possible.
Image Threshold HSV
Use this module to transform HSV images (hue, saturation, value) in binary images. Pixels with values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple color check is possible.
Image Blob
Use this module to detect, count and sort objects. Associated white pixels in a binary image with certain criterias like size are considered as one object.
Image Comparison
Use this module to compare images with a reference image. It is necessary to teach a reference image. The following images are compared with the reference.
Image Measure
Use this module to find lines, circles or arcs or to find segments on lines, circles or arcs. With the found elements it is possible to measure angles, distances or to find special points.
Image OCR
Use this module to read letters, numbers or symbols.
Deep OCR
This module is not included in the uniVision license package. It is available from the uniVision Extended license package.
This module reads letters and numbers using deep learning methods. Compared to rule-based OCR methods, Deep OCR is based on pre-trained neural networks, which greatly increases the accuracy of text recognition.
Image ONNX
This module is included in the uniVision AI license package.
This module can be used to import and run ONNX models.
Image AI
This module is included in the uniVision AI license package.
With this module, training images can be transferred directly to the AI Lab and AI models can be loaded from the AI Lab and executed in uniVision.
Image Code 1D
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module to read all common 1D codes.
Image Code 2D
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module to read all common 2D codes.
HALCON Script
This module is not included in the uniVision license package. It is available as of the uniVision Script package.
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Robot Vision
The module extends the software-side functional scope of the B60 smart camera with the robot vision interface. This enables direct communication between B60 series smart cameras and robots.
Preprocessing
Image Calibration
Use this module to calibrate the camera image and to get mm values out of pixel values.
Image Region
Use this module to select only a part of the image as region of interest. The area can be created individually by rectancles, circles and polygons.
Image Manipulation
This module can be used to crop and rotate the image as well as adjust the aspect ratio.
Image Filter
Use this module to highlight or suppress certain image characteristics.
Image Locator
Use this module for detecting or tracking objects by feature points. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Pattern Match
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module for detecting or tracking objects by pattern match. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Coordinate System
Use this module for tracking an object by creating the coordinate system in a flexible way.
Processing
Image Threshold
Use this module to transform a grey image in a binary image. Pixels with grey values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple presence check is possible.
Image Threshold HSV
Use this module to transform HSV images (hue, saturation, value) in binary images. Pixels with values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple color check is possible.
Image Blob
Use this module to detect, count and sort objects. Associated white pixels in a binary image with certain criterias like size are considered as one object.
Image Comparison
Use this module to compare images with a reference image. It is necessary to teach a reference image. The following images are compared with the reference.
Image Measure
Use this module to find lines, circles or arcs or to find segments on lines, circles or arcs. With the found elements it is possible to measure angles, distances or to find special points.
Image OCR
Use this module to read letters, numbers or symbols.
Deep OCR
This module is not included in the uniVision license package. It is available from the uniVision Extended license package.
This module reads letters and numbers using deep learning methods. Compared to rule-based OCR methods, Deep OCR is based on pre-trained neural networks, which greatly increases the accuracy of text recognition.
Image ONNX
This module can be used to import and run ONNX models.
Image AI
With this module, training images can be transferred directly to the AI Lab and AI models can be loaded from the AI Lab and executed in uniVision.
Image Code 1D
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module to read all common 1D codes.
Image Code 2D
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module to read all common 2D codes.
HALCON Script
This module is not included in the uniVision license package. It is available as of the uniVision Script package.
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
License Upgrades B60
| Order number | Name | Modules |
|---|---|---|
| DNNL018 | License B60 uniVision Extended | Image Code 1D Image Code 2D Image Pattern Match Deep OCR |
| DNNL019 | License B60 uniVision Script | Image Code 1D Image Code 2D Image Pattern Match HALCON Script Deep OCR |
| DNNL020 | License B60 uniVision Extended to uniVision Script | HALCON Script |
| DNNL021 | License B60 uniVision Robot Vision | Robot Vision device |
| DNNL031 | License B60 uniVision AI | Image ONNX Image AI |
| DNNL018 | ||
|
License B60 uniVision Extended
|
Image Code 1D
Image Code 2D Image Pattern Match Deep OCR |
|
| DNNL019 | ||
|
License B60 uniVision Script
|
Image Code 1D
Image Code 2D Image Pattern Match HALCON Script Deep OCR |
|
| DNNL020 | ||
|
License B60 uniVision Extended to uniVision Script
|
HALCON Script
|
|
| DNNL021 | ||
|
License B60 uniVision Robot Vision
|
Robot Vision device
|
|
| DNNL031 | ||
|
License B60 uniVision AI
|
Image ONNX
Image AI |
|
wenglor uniVision 3 with Machine Vision Cameras and Machine Vision Controller
Software Packages
The overview shows the modules included in the respective license package in blue; modules that are not included in the license package are shown in gray.
Preprocessing
Image Calibration
Use this module to calibrate the camera image and to get mm values out of pixel values.
Image Region
Use this module to select only a part of the image as region of interest. The area can be created individually by rectancles, circles and polygons.
Image Manipulation
This module can be used to crop and rotate the image as well as adjust the aspect ratio.
Image Filter
Use this module to highlight or suppress certain image characteristics.
Image Locator
Use this module for detecting or tracking objects by feature points. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Pattern Match
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module for detecting or tracking objects by pattern match. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Coordinate System
Use this module for tracking an object by creating the coordinate system in a flexible way.
Processing
Image Threshold
Use this module to transform a grey image in a binary image. Pixels with grey values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple presence check is possible.
Image Threshold HSV
Use this module to transform HSV images (hue, saturation, value) in binary images. Pixels with values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple color check is possible.
Image Blob
Use this module to detect, count and sort objects. Associated white pixels in a binary image with certain criterias like size are considered as one object.
Image Comparison
Use this module to compare images with a reference image. It is necessary to teach a reference image. The following images are compared with the reference.
Image Measure
Use this module to find lines, circles or arcs or to find segments on lines, circles or arcs. With the found elements it is possible to measure angles, distances or to find special points.
Image OCR
Use this module to read letters, numbers or symbols.
Deep OCR
This module is not included in the uniVision license package. It is available from the uniVision Extended license package.
This module reads letters and numbers using deep learning methods. Compared to rule-based OCR methods, Deep OCR is based on pre-trained neural networks, which greatly increases the accuracy of text recognition.
Image ONNX
This module is included in the uniVision AI license package.
This module can be used to import and run ONNX models.
Image AI
This module is included in the uniVision AI license package.
With this module, training images can be transferred directly to the AI Lab and AI models can be loaded from the AI Lab and executed in uniVision.
Image Code 1D
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module to read all common 1D codes.
Image Code 2D
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module to read all common 2D codes.
HALCON Script
This module is not included in the uniVision license package. It is available as of the uniVision Script package.
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
Device IO Unit
With this module, the inputs and outputs can be configured in order to specify which action will take place as the result of a given event. This module is only available for variants with digital inputs and outputs.
Preprocessing
Image Calibration
Use this module to calibrate the camera image and to get mm values out of pixel values.
Image Region
Use this module to select only a part of the image as region of interest. The area can be created individually by rectancles, circles and polygons.
Image Manipulation
This module can be used to crop and rotate the image as well as adjust the aspect ratio.
Image Filter
Use this module to highlight or suppress certain image characteristics.
Image Locator
Use this module for detecting or tracking objects by feature points. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Pattern Match
Use this module for detecting or tracking objects by pattern match. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Coordinate System
Use this module for tracking an object by creating the coordinate system in a flexible way.
Processing
Image Threshold
Use this module to transform a grey image in a binary image. Pixels with grey values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple presence check is possible.
Image Threshold HSV
Use this module to transform HSV images (hue, saturation, value) in binary images. Pixels with values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple color check is possible.
Image Blob
Use this module to detect, count and sort objects. Associated white pixels in a binary image with certain criterias like size are considered as one object.
Image Comparison
Use this module to compare images with a reference image. It is necessary to teach a reference image. The following images are compared with the reference.
Image Measure
Use this module to find lines, circles or arcs or to find segments on lines, circles or arcs. With the found elements it is possible to measure angles, distances or to find special points.
Image OCR
Use this module to read letters, numbers or symbols.
Deep OCR
This module reads letters and numbers using deep learning methods. Compared to rule-based OCR methods, Deep OCR is based on pre-trained neural networks, which greatly increases the accuracy of text recognition.
Image ONNX
This module is included in the uniVision AI license package.
This module can be used to import and run ONNX models.
Image AI
This module is included in the uniVision AI license package.
With this module, training images can be transferred directly to the AI Lab and AI models can be loaded from the AI Lab and executed in uniVision.
Image Code 1D
Use this module to read all common 1D codes.
Image Code 2D
Use this module to read all common 2D codes.
HALCON Script
This module is not included in the uniVision license package. It is available as of the uniVision Script package.
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
Device IO Unit
With this module, the inputs and outputs can be configured in order to specify which action will take place as the result of a given event. This module is only available for variants with digital inputs and outputs.
Preprocessing
Image Calibration
Use this module to calibrate the camera image and to get mm values out of pixel values.
Image Region
Use this module to select only a part of the image as region of interest. The area can be created individually by rectancles, circles and polygons.
Image Manipulation
This module can be used to crop and rotate the image as well as adjust the aspect ratio.
Image Filter
Use this module to highlight or suppress certain image characteristics.
Image Locator
Use this module for detecting or tracking objects by feature points. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Pattern Match
Use this module for detecting or tracking objects by pattern match. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Coordinate System
Use this module for tracking an object by creating the coordinate system in a flexible way.
Processing
Image Threshold
Use this module to transform a grey image in a binary image. Pixels with grey values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple presence check is possible.
Image Threshold HSV
Use this module to transform HSV images (hue, saturation, value) in binary images. Pixels with values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple color check is possible.
Image Blob
Use this module to detect, count and sort objects. Associated white pixels in a binary image with certain criterias like size are considered as one object.
Image Comparison
Use this module to compare images with a reference image. It is necessary to teach a reference image. The following images are compared with the reference.
Image Measure
Use this module to find lines, circles or arcs or to find segments on lines, circles or arcs. With the found elements it is possible to measure angles, distances or to find special points.
Image OCR
Use this module to read letters, numbers or symbols.
Deep OCR
This module reads letters and numbers using deep learning methods. Compared to rule-based OCR methods, Deep OCR is based on pre-trained neural networks, which greatly increases the accuracy of text recognition.
Image ONNX
This module is included in the uniVision AI license package.
This module can be used to import and run ONNX models.
Image AI
This module is included in the uniVision AI license package.
With this module, training images can be transferred directly to the AI Lab and AI models can be loaded from the AI Lab and executed in uniVision.
Image Code 1D
Use this module to read all common 1D codes.
Image Code 2D
Use this module to read all common 2D codes.
HALCON Script
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
Device IO Unit
With this module, the inputs and outputs can be configured in order to specify which action will take place as the result of a given event. This module is only available for variants with digital inputs and outputs.
Preprocessing
Image Calibration
Use this module to calibrate the camera image and to get mm values out of pixel values.
Image Region
Use this module to select only a part of the image as region of interest. The area can be created individually by rectancles, circles and polygons.
Image Manipulation
This module can be used to crop and rotate the image as well as adjust the aspect ratio.
Image Filter
Use this module to highlight or suppress certain image characteristics.
Image Locator
Use this module for detecting or tracking objects by feature points. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Pattern Match
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module for detecting or tracking objects by pattern match. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Coordinate System
Use this module for tracking an object by creating the coordinate system in a flexible way.
Processing
Image Threshold
Use this module to transform a grey image in a binary image. Pixels with grey values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple presence check is possible.
Image Threshold HSV
Use this module to transform HSV images (hue, saturation, value) in binary images. Pixels with values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple color check is possible.
Image Blob
Use this module to detect, count and sort objects. Associated white pixels in a binary image with certain criterias like size are considered as one object.
Image Comparison
Use this module to compare images with a reference image. It is necessary to teach a reference image. The following images are compared with the reference.
Image Measure
Use this module to find lines, circles or arcs or to find segments on lines, circles or arcs. With the found elements it is possible to measure angles, distances or to find special points.
Image OCR
Use this module to read letters, numbers or symbols.
Deep OCR
This module is not included in the uniVision license package. It is available from the uniVision Extended license package.
This module reads letters and numbers using deep learning methods. Compared to rule-based OCR methods, Deep OCR is based on pre-trained neural networks, which greatly increases the accuracy of text recognition.
Image ONNX
This module is included in the uniVision AI license package.
This module can be used to import and run ONNX models.
Image AI
This module is included in the uniVision AI license package.
With this module, training images can be transferred directly to the AI Lab and AI models can be loaded from the AI Lab and executed in uniVision.
Image Code 1D
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module to read all common 1D codes.
Image Code 2D
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module to read all common 2D codes.
HALCON Script
This module is not included in the uniVision license package. It is available as of the uniVision Script package.
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
Device Robot Vision
The module extends the software-side functional scope of the B60 smart camera with the robot vision interface. This enables direct communication between B60 series smart cameras and robots.
Device IO Unit
With this module, the inputs and outputs can be configured in order to specify which action will take place as the result of a given event. This module is only available for variants with digital inputs and outputs.
Preprocessing
Image Calibration
Use this module to calibrate the camera image and to get mm values out of pixel values.
Image Region
Use this module to select only a part of the image as region of interest. The area can be created individually by rectancles, circles and polygons.
Image Manipulation
This module can be used to crop and rotate the image as well as adjust the aspect ratio.
Image Filter
Use this module to highlight or suppress certain image characteristics.
Image Locator
Use this module for detecting or tracking objects by feature points. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Pattern Match
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module for detecting or tracking objects by pattern match. It is necessary to teach in one or several objects. In the following images, the objects are found independent of the position and orientation.
Image Coordinate System
Use this module for tracking an object by creating the coordinate system in a flexible way.
Processing
Image Threshold
Use this module to transform a grey image in a binary image. Pixels with grey values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple presence check is possible.
Image Threshold HSV
Use this module to transform HSV images (hue, saturation, value) in binary images. Pixels with values within the thresholds are shown white and all other pixels are shown black. By counting the white pixels, a simple color check is possible.
Image Blob
Use this module to detect, count and sort objects. Associated white pixels in a binary image with certain criterias like size are considered as one object.
Image Comparison
Use this module to compare images with a reference image. It is necessary to teach a reference image. The following images are compared with the reference.
Image Measure
Use this module to find lines, circles or arcs or to find segments on lines, circles or arcs. With the found elements it is possible to measure angles, distances or to find special points.
Image OCR
Use this module to read letters, numbers or symbols.
Deep OCR
This module is not included in the uniVision license package. It is available from the uniVision Extended license package.
This module reads letters and numbers using deep learning methods. Compared to rule-based OCR methods, Deep OCR is based on pre-trained neural networks, which greatly increases the accuracy of text recognition.
Image ONNX
This module can be used to import and run ONNX models.
Image AI
With this module, training images can be transferred directly to the AI Lab and AI models can be loaded from the AI Lab and executed in uniVision.
Image Code 1D
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module to read all common 1D codes.
Image Code 2D
This module is not included in the uniVision license package. It is available as of the uniVision Extended package.
Use this module to read all common 2D codes.
HALCON Script
This module is not included in the uniVision license package. It is available as of the uniVision Script package.
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
MVC License Upgrades
| Order number | Name | Modules |
|---|---|---|
| DNNL023 | License MVC uniVision Extended | Image Code 1D Image Code 2D Image Pattern Match Deep OCR |
| DNNL024 | License MVC uniVision Script | Image Code 1D Image Code 2D Image Pattern Match HALCON Script Deep OCR |
| DNNL025 | License MVC uniVision Extended to uniVision Script | HALCON Script |
| DNNL026 | License MVC uniVision Robotics | Device Robot Vision Device Robot Weld Seam Tracking |
| DNNL032 | License MVC uniVision AI | Image ONNX Image AI |
| DNNL023 | ||
|
License MVC uniVision Extended
|
Image Code 1D
Image Code 2D Image Pattern Match Deep OCR |
|
| DNNL024 | ||
|
License MVC uniVision Script
|
Image Code 1D
Image Code 2D Image Pattern Match HALCON Script Deep OCR |
|
| DNNL025 | ||
|
License MVC uniVision Extended to uniVision Script
|
HALCON Script
|
|
| DNNL026 | ||
|
License MVC uniVision Robotics
|
Device Robot Vision
Device Robot Weld Seam Tracking |
|
| DNNL032 | ||
|
License MVC uniVision AI
|
Image ONNX
Image AI |
|
wenglor uniVision 3 with 2D/3D Profile Sensors and Machine Vision Controllers
Software Packages 2D/3D Profile Sensors with MVC
The overview shows the modules for profile evaluation included in the respective license package in blue; modules that are not included in the license package are shown in gray.
Preprocessing
Profile Region
This module is used to select parts of the image as region of interest. A small, precisely defined region results in faster evaluation and a higher image refresh rate.
Profile Filter
This module amplifies or suppresses features of profiles.
Profile Sorting
This module can be used to change the sorting of points in a profile.
Profile Locator
This module is used to detect or track contours based on feature points. Learned contours are found in the following profiles regardless of their position and orientation.
Profile Coordinate System
This module is used to track an object with a flexibly created coordinate system.
Processing
Profile Measure
This module can be used to specify dimensional accuracy checks on distances, lengths, diameters or angles and to carry out measurements. Lines and circles are found with the help of search rays. Distances and angles can be measured between detected lines or points.
Profile Calculus
This module can be used to determine the highest and lowest point of a point cloud.
HALCON Script
This module is not included in the uniVision license package. It is available as of the uniVision Script package.
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Profile Weld Seam Tracking
This module reliably detects various joints before the welding process.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
Device IO Unit
With this module, the inputs and outputs can be configured in order to specify which action will take place as the result of a given event. This module is only available for variants with digital inputs and outputs.
Device Robot Weld Seam Tracking
This module is only included in the uniVision Robotics license package.
This module acts as a communication interface to welding robots manufactured by KUKA, ABB, FANUC, Yaskawa or Kawasaki.
Preprocessing
Profile Region
This module is used to select parts of the image as region of interest. A small, precisely defined region results in faster evaluation and a higher image refresh rate.
Profile Filter
This module amplifies or suppresses features of profiles.
Profile Sorting
This module can be used to change the sorting of points in a profile.
Profile Locator
This module is used to detect or track contours based on feature points. Learned contours are found in the following profiles regardless of their position and orientation.
Profile Coordinate System
This module is used to track an object with a flexibly created coordinate system.
Processing
Profile Measure
This module can be used to specify dimensional accuracy checks on distances, lengths, diameters or angles and to carry out measurements. Lines and circles are found with the help of search rays. Distances and angles can be measured between detected lines or points.
Profile Calculus
This module can be used to determine the highest and lowest point of a point cloud.
HALCON Script
This module is not included in the uniVision license package. It is available as of the uniVision Script package.
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Profile Weld Seam Tracking
This module reliably detects various joints before the welding process.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
Device IO Unit
With this module, the inputs and outputs can be configured in order to specify which action will take place as the result of a given event. This module is only available for variants with digital inputs and outputs.
Device Robot Weld Seam Tracking
This module is only included in the uniVision Robotics license package.
This module acts as a communication interface to welding robots manufactured by KUKA, ABB, FANUC, Yaskawa or Kawasaki.
Preprocessing
Profile Region
This module is used to select parts of the image as region of interest. A small, precisely defined region results in faster evaluation and a higher image refresh rate.
Profile Filter
This module amplifies or suppresses features of profiles.
Profile Sorting
This module can be used to change the sorting of points in a profile.
Profile Locator
This module is used to detect or track contours based on feature points. Learned contours are found in the following profiles regardless of their position and orientation.
Profile Coordinate System
This module is used to track an object with a flexibly created coordinate system.
Processing
Profile Measure
This module can be used to specify dimensional accuracy checks on distances, lengths, diameters or angles and to carry out measurements. Lines and circles are found with the help of search rays. Distances and angles can be measured between detected lines or points.
Profile Calculus
This module can be used to determine the highest and lowest point of a point cloud.
HALCON Script
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Profile Weld Seam Tracking
This module reliably detects various joints before the welding process.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
Device IO Unit
With this module, the inputs and outputs can be configured in order to specify which action will take place as the result of a given event. This module is only available for variants with digital inputs and outputs.
Device Robot Weld Seam Tracking
This module is only included in the uniVision Robotics license package.
This module acts as a communication interface to welding robots manufactured by KUKA, ABB, FANUC, Yaskawa or Kawasaki.
Preprocessing
Profile Region
This module is used to select parts of the image as region of interest. A small, precisely defined region results in faster evaluation and a higher image refresh rate.
Profile Filter
This module amplifies or suppresses features of profiles.
Profile Sorting
This module can be used to change the sorting of points in a profile.
Profile Locator
This module is used to detect or track contours based on feature points. Learned contours are found in the following profiles regardless of their position and orientation.
Profile Coordinate System
This module is used to track an object with a flexibly created coordinate system.
Processing
Profile Measure
This module can be used to specify dimensional accuracy checks on distances, lengths, diameters or angles and to carry out measurements. Lines and circles are found with the help of search rays. Distances and angles can be measured between detected lines or points.
Profile Calculus
This module can be used to determine the highest and lowest point of a point cloud.
HALCON Script
This module is not included in the uniVision license package. It is available as of the uniVision Script package.
Use this module to add HALCON scripts to the uniVision job in order to use the flexible programming options of the HALCON software for advanced job configuration.
Profile Weld Seam Tracking
This module reliably detects various joints before the welding process.
Calculations
Spreadsheet
Use this module to do calculations and comparisons with several results in one spreadsheet.
Counter
Use this module to count good and bad parts.
Match Code
Use this module to compare a code or a text with a match code.
Teach Numeric
Use this module to teach and compare numbers.
Math
Use this module to do mathematical operations with several numbers.
Logic
Use this module to do logical operations with several values.
Numeric Comparison
This module compares two results.
Statistics
Use this module to analyse statistic results for one or several values.
Interfaces
Device TCP
Use this module to configure process data via TCP.
Device UDP
Use this module to configure process data via UDP.
Device FTP
Use this module to configure process data via FTP. Data can be stored on the machine vision device or on a FTP or SFTP server in the network.
Device Industrial Ethernet
This module is used to configure process data via PROFINET, EtherNet/IP or EtherCAT.
Device IO Unit
With this module, the inputs and outputs can be configured in order to specify which action will take place as the result of a given event. This module is only available for variants with digital inputs and outputs.
Device Robot Weld Seam Tracking
This module acts as a communication interface to welding robots manufactured by KUKA, ABB, FANUC, Yaskawa or Kawasaki.
MVC License Upgrades
| Order number | Name | Modules |
|---|---|---|
| DNNL023 | License MVC uniVision Extended | Image Code 1D Image Code 2D Image Pattern Match |
| DNNL024 | License MVC uniVision Script | Image Code 1D Image Code 2D Image Pattern Match HALCON Script |
| DNNL025 | License MVC uniVision Extended to uniVision Script | HALCON Script |
| DNNL026 | License MVC uniVision Robotics | Device Robot Vision Device Robot Weld Seam Tracking |
| DNNL023 | ||
|
License MVC uniVision Extended
|
Image Code 1D
Image Code 2D Image Pattern Match |
|
| DNNL024 | ||
|
License MVC uniVision Script
|
Image Code 1D
Image Code 2D Image Pattern Match HALCON Script |
|
| DNNL025 | ||
|
License MVC uniVision Extended to uniVision Script
|
HALCON Script
|
|
| DNNL026 | ||
|
License MVC uniVision Robotics
|
Device Robot Vision
Device Robot Weld Seam Tracking |
|
