Features at a Glance
- Low-cost
- Teach-in, external teach-in
LM89PCT2 Retro-Reflex Sensor Universal
Available from stock
Added to Your Cart:
A reflector must be used in combination with these sensors. They can be installed in all kinds of industrial environments thanks to ample functional reserve. Even reflective objects can be reliably recognized through the use of polarized light.
This product has been discontinued, but is still available as a spare part.
Optical Data | |
|---|---|
| Range | 6,500mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Switching Hysteresis | < 5% |
| Light Source | Red Light |
| Wavelength | 660nm |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000h |
| Max. Ambient Light | 10,000Lux |
| Opening Angle | 5° |
| Two-Lens Optic | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 40mA |
| Switching Frequency | 2kHz |
| Response Time | 250µs |
| On-/Off-Delay (RS-232) | 0 ... 5s |
| Temperature Drift | < 5% |
| Temperature Range | -25 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 200mA |
| Residual Current Switching Output | < 50µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Teach Mode | NT, MT |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material | Plastic, PBT |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 28g |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor |
Output | |
|---|---|
| PNP NC | yes |
| External teach-in input | yes |
| RS-232 with Adapterbox | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC/NO NO |
| Other parameters |
Off-delay On-delay |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
30 = Switching Status/Contamination Warning
06 = Teach Button |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M4 = 1 Nm
|
Reflector data | |
|---|---|
| RQ100BA | 0.04 ... 6.5m |
| RE18040BA | 0.12 ... 3m |
| RQ84BA | 0.06 ... 5m |
| RR84BA | 0.06 ... 4.5m |
| RE9538BA | 0.12 ... 1.5m |
| RE6151BM | 0.14 ... 4m |
| RE6151BA | 0.07 ... 2m |
| RR50_A | 0.03 ... 3.3m |
| RE6040BA | 0.05 ... 4m |
| RE8222BA | 0.08 ... 2m |
| RR34_M | 0.16 ... 2.2m |
| RE3220BM | 0.2 ... 1.5m |
| RE6210BM | 0.2 ... 1.7m |
| RR25_M | 0.15 ... 1.8m |
| RR25KP | 0.14 ... 1m |
| RR21_M | 0.14 ... 1.9m |
| ZRAE02B01 | 0.15 ... 2.5m |
| ZRME01B01 | 0.2 ... 0.9m |
| ZRME03B01 | 0.2 ... 2.3m |
| ZRMR02K01 | 0.16 ... 1m |
| ZRMS02_01 | 0.2 ... 1m |
| RF505 | 0.19 ... 1.5m |
| RF255 | 0.16 ... 1.4m |
| RF508 | 0.21 ... 1.4m |
| RF258 | 0.31 ... 1.4m |
| ZRDF03K01 | 0.16 ... 4m |
| ZRDF10K01 | 0.16 ... 4.5m |
Complementary Products |
|---|
|
ECAD data
