ZAC50EN02 Switch with PoE

Available from stock

Added to Your Cart:

Added to your request list:

This switch allows simple connecting of up to four Industrial Ethernet products. Two PoE-capable ports supply connected devices with the needed power. In addition, up to four PNP sensors and actuators can be connected via two digital I/O ports.

Features at a Glance

2 digital I/O ports
2 PoE-capable ports
4 Industrial Ethernet ports
High protection class IP67
Rugged aluminium housing

Technical data

Electrical Data
Supply Voltage	18 ... 32V
Power consumption of device max.	0.25A
Power consumption of system max.	2A
Max. PoE Capacity	25W
Max. Switching Current Switching Outputs	0.6A
max. total current of the digital I/O ports	1A
Switching Output Voltage Drop	< 2.5V
Temperature Range	-25 ... 60°C
Short Circuit Protection	yes
Overload Protection	yes
Reverse Polarity Protection	yes
PoE Ports	2
Number of digital I/O ports	2
Supported PoE Standard	IEEE802.3af, IEEE802.at
Supported PoE Classes	Class 0, 1, 2, 3
Transmission rate	10/100Mbit/s
Transmission Mode	Full/Half Duplex
Switch Mode	Store & Forward
VLAN Prioritization	yes
Auto-Crossover	yes
Auto-Negotiating	yes
Auto-Polarity	yes
Interface	EtherNet/IP™
Protection Class	III

Mechanical Data
Setting Method	Web server
Material	Aluminum
Degree of Protection	IP67
Type of Connection Power	2 × 7/8", 5-pin
Type of Connection Industrial Ethernet Ports	2 × M12; 4-pin
Type of Connection PoE Ports	2 × M12; 8-pin
Type of connection digital I/O ports	2 × M12; 4-pin
Weight	1,121g