OLEBS925 Light Curtain Pick-to-Light

Pick to light light curtains use the single-lens reflex principle. The necessary reflector is pre-installed on the rear of the housing and serves as a reflective surface for the neighboring light curtain, making installation easier. The integrated two-color light from the job display is visible from 360° and shows both correct and incorrect picks.

This product has been discontinued. Click here to display similar products.

Features at a Glance

Error prevention during partial picking processes in shelves and storage locations
Low mounting thanks to integrated reflector
Rugged aluminium housing
360° visible, two-color job display

Technical data

Optical Data
Range	2,000 mm
Min. Distance to Reflector	100 mm
Measurement Field Height (MFH)	420 mm
Beam Distance	30 mm
Switching Hysteresis	< 15 %
Light Source	Red Light
Polarization Filter	yes
Service Life (T = +25 °C)	100,000 h
Max. Ambient Light	10,000 Lux
Opening Angle	2.5 °
Two-Lens Optic	yes

Electrical Data
Supply Voltage	10 ... 30 V DC
Current Consumption (Ub = 24 V)	< 70 mA
Switching Frequency	40 Hz
Response Time	12 ms
Temperature Drift	< 10 %
Temperature Range	-25 ... 60 °C
Switching Output Voltage Drop	< 2.5 V
PNP Switching Output/Switching Current	200 mA
Residual Current Switching Output	< 50 µA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Protection Class	III

Mechanical Data
Setting Method	Teach-In
Housing Material	Aluminum, powder-coated Plastic, PC
Optic Cover	Plastic, PMMA
Degree of Protection	IP65
Connection	M12 × 1; 4-pin
Cable Length	250 mm
Housing Length (L)	546 mm
Reflector Length (RL)	486 mm
Weight	270 g