text.skipToContent text.skipToNavigation

CP70QXVT80S806 Laser Distance Sensor Triangulation

Usually ready to ship in 1–3 days.
These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color and brightness. Two independent switching outputs are available, at which two switching thresholds and one on-delay or off-delay time can be set in 10 ms increments. Sensor functions can be activated and values can be output via the RS-232 interface.

Optical Data

Range 800 mm
Setting Range 60 ... 800 mm
Switching Hysteresis  < 1 %
Light Source Laser (red)
Wavelength 655 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 2
Max. Ambient Light 10,000 Lux

Electrical Data

Supply Voltage 10 ... 30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Switching Frequency 150 Hz
Response Time 3,300 µs
On-/Off-Delay (RS-232) 0 ... 1 s
Temperature Drift < 80 µm/K
Temperature Range -25 ... 60 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 1.5 V
Switching Output/Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Teach Mode HT, VT, TP
Interface RS-232
Baud Rate 38,400 Bd
Protection Class III

Mechanical Data

Setting Method Teach-In
Housing Material Plastic, ABS
Plastic, PC
Degree of Protection IP67
Connection M12 × 1; 8-pin
Optic Cover Plastic, PMMA
Weight 45 g


Error Output yes
Configurable as PNP/NPN/Push-Pull yes
Switchable to NC/NO yes
RS-232 Interface yes

Adjustable parameters

Output Error Output
Other parameters Off-delay
Exposure time
Laser light
Switching hysteresis
Teach-in mode
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Table 1

Detection Range 60 mm 800 mm
Spot Size 0,6 × 2,5 mm 4 × 10 mm

Connection Diagram

Ctrl. Panel

07 = Selector Switch
24 = Plus Button
25 = Minus Button
03 = Error Indicator
01 = Switching Status Indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M4 = 0.5 Nm

Complementary Products

  • Interface Cable S232W3
  • Fieldbus Gateway ZAGxxxN01, EPGG001
Initial start-up instructions
Operating instructions
Quick-start guide
Declarations of Conformity / Approvals
Product Comparison