Features at a Glance
- Secure detection of black objects also in extremely inclined positions with wintec
- Industrial Ethernet
- Reliable in case of glossy objects with wintec
- Web server and graphic display for simple operation
OY2TA104P0150C Laser Distance Sensor Time of Flight
Available on request.
Added to Your Cart:
These sensors have scratch-resistant optics and the emitted light can be switched off. They use the transit time measurement principle to measure the distance between the sensor and the object.
Sensors with Industrial Ethernet make the analog and digital input cards at control units unnecessary, as all service and measurement data is read, analyzed and processed in the control unit in real time, without the need for conversion. Power over Ethernet connects data transfer and power supply in one cable and thus reduces the wiring effort.
Optical Data | |
|---|---|
| Working Range | 0.1 ... 10.1 m |
| Reproducibility maximum | 7 mm |
| Linearity Deviation | 20 mm |
| Light Source | Laser (red) |
| Wavelength | 660 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Beam Divergence | < 2 mrad |
| Max. Ambient Light | 5,000 Lux |
| Light Spot Diameter | see Table 1 |
| Reflector required | no |
Electrical Data | |
|---|---|
| Port Type | 100BASE-TX |
| PoE Class | 1 |
| Response Time | 10 ms |
| Temperature Range | -25 ... 50 °C |
| Reverse Polarity Protection | yes |
| Interface | EtherCAT |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Menu (OLED) |
| Housing Material |
Plastic, ABS Plastic, PC |
| Optic Cover | Plastic, PMMA |
| Degree of Protection | IP68 |
| Connection | M12 × 1; 8-pin, X-cod. |
| Weight | 230 g |
General Data | |
|---|---|
| Web server | yes |
| EoE (Ethernet over EtherCAT) | yes |
Output | |
|---|---|
| EtherCAT | yes |
Standards and certificates |
|---|
|
|
Display brightness may decrease with age. This does not result in any impairment of the sensor function.
Table 1 |
||
|---|---|---|
| Working Distance | 0 m | 10 m |
| Light Spot Diameter | 5 mm | < 20 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
60 = display
20 = Enter key 22 = Up key 23 = Down key 85 = Link/Act LED 86 = STATUS 78 = Module status |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M4 = 0.5 Nm
|
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
