text.skipToContent text.skipToNavigation

UF87PA3 Fiber-optic amplifier

Available from stock
These sensors are equipped for use with glass fiber optic cables but can be used with or without one. The transmitter and receiver are located in a single housing. The sensor evaluates transmitted light reflected back from the object and the output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances.

Optical Data

Range 3,000 mm
Switching Hysteresis  < 15 %
Light Source Infrared Light
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux
Opening Angle 12 °

Electrical Data

Supply Voltage 10 ... 30 V DC
Current Consumption (Ub = 24 V) < 40 mA
Switching Frequency 100 Hz
Response Time 5 ms
Temperature Drift < 10 %
Temperature Range -25 ... 60 °C
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 200 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III

Mechanical Data

Setting Method Potentiometer
Housing Material Brass, nickel-plated
Optic Cover Plastic, PC
Full Encapsulation yes
Degree of Protection IP65
Connection M12 × 1; 4-pin
Weight 126 g

Output

PNP NC, PNP NO yes

Adjustable parameters

Circuit NC
NC+NO
NO

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Connection Diagram

Ctrl. Panel

05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
B_SYM_SCHLUESSEL_36.pdf Wrench Size

Complementary Products

  • Glass Fiber-Optic Cable
  • PNP-NPN Converter BG2V1P-N-2M
Product Comparison