Features at a Glance
- Recognition of transparent objects
- Menu-driven settings
- Reflex and through-beam operation mode are possible
- Teach-in
- Mount for fiber optic cable adapter 3
ODX402P0008 Fiber-optic amplifier
Available on request.
Added to Your Cart:
wenglor fiber-optic cables can be adapted to these sensors. The modern graphic display assures easy, menu-driven sensor setup. Signal strengths and the switching threshold can be read from the display as numeric values or as a bar graph.
Optical Data | |
|---|---|
| Switching Hysteresis | < 15 % |
| Light Source | Red Light |
| Wavelength | 660 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Switching Frequency | 4 kHz |
| Response Time | 125 µs |
| On-/Off-Delay | 0 ... 10,000 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25 ... 60 °C |
| Switching Output Voltage Drop | < 2.5 V |
| Switching Output/Switching Current | 100 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | NT, MT, ZT, DT, FT, HT, TP |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Menu (OLED) |
| Housing Material |
Plastic, ABS Plastic, PC |
| Degree of Protection | IP65 |
| Connection | M8 × 1; 3-pin |
| DIN-Rail mounting | 35 mm |
| Weight | 40 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 854.78 a |
General Data | |
|---|---|
| Selectable menu language | X |
| Password Protection | X |
Output | |
|---|---|
| PNP NO | yes |
Adjustable parameters | |
|---|---|
| Output |
Push-pull PNP |
| Circuit |
NC NC/NO NO |
Standards and certificates |
|---|
|
|
Display brightness may decrease with age. This does not result in any impairment of the sensor function.
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
60 = display
20 = Enter key 22 = Up key 23 = Down key |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
|
Complementary Products |
|---|
|
ECAD data
