Features at a Glance
- Interchangeable sensor head
- Easy replacement thanks to quick-release fastener
- Minimal mounting clearance thanks to wenglor weproTec
- Long service life at temperatures of up to 250 °C
- Switching distance configurable via IO-Link
INTT220 Inductive Sensor Head for Extreme Temperature Ranges
Available from stock
Added to Your Cart:
The high-temperature inductive sensors are designed for use in very hot work environments and consist of a sensor head and a separate analysis module with cable. Long switching distances and a long service life in hot areas ensure maximum system reliability. Interchangeable sensor heads and numerous standard cable lengths with integrated analysis module are available separately. weproTec technology makes it possible to install the sensors directly next to or opposite one another. In addition, IO-Link can be used to individually configure sensor parameters such as switching distances and output functions.
Inductive Data |
|
|---|---|
| Switching Distance | 25 mm |
| Standard Target | 75 × 75 mm |
| Correction Factors Stainless Steel V2A/CuZn/Al | 0,60/1,00/0,85 |
| Mounting | Non-flush |
| Mounting A/B/C/D in mm | 10/120/50/20 |
| Mounting B1 in mm | 0...40 |
| Switching Hysteresis | < 10 % |
| Use | With INTT2xx analysis module |
Electrical Data |
|
|---|---|
| Sensor head temperature range | -10 ... 250 °C |
| Service Life (T = +200 °C) | 100,000 h |
| Service Life (T = +250 °C) | 60,000 h |
Mechanical Data |
|
|---|---|
| Sensing face | Plastic, PEEK |
| Sensor head material | Stainless steel, V2A (1.4305/303) |
| Degree of Protection |
IP50 IP51 * |
| Connection Type | Plug variant |
| PWIS-free | yes |
| Weight | 396 g |
General Data |
|
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor head 2 × M8 screws |
Function |
|
|---|---|
| Programmable switching distance | 15/20/25 mm |
Output |
|
|---|---|
| IO-Link | yes |
| Error Output | yes |
| PNP NO | yes |
Standards and certificates |
|---|
|
|
* IP51 only when the sensor head is mounted with the active surface facing upward (water droplets falling from above).
Mounting |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Push-pull plug connectors
|
Complementary Products |
|---|
|
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
