text.skipToContent text.skipToNavigation

Features at a Glance

Fully encapsulated
Large working range
Recognition of high-gloss and jet black objects

OPT164 Retro-Reflex Sensor

Available from stock

Added to Your Cart:

Added to your request list:

These sensors have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between two rollers below the conveyor level. They are thus protected against mechanical damage.

Features at a Glance

Fully encapsulated
Large working range
Recognition of high-gloss and jet black objects

Technical data

Optical Data
Range	6,500 mm
Reference Reflector/Reflector Foil	RQ100BA
Min. Distance to Reflector	100 mm
Switching Hysteresis	< 15 %
Light Source	Red Light
Polarization Filter	yes
Service Life (T = +25 °C)	100,000 h
Max. Ambient Light	10,000 Lux
Opening Angle	5 °
Two-Lens Optic	yes

Electrical Data
Supply Voltage	18 ... 30 V DC
Current Consumption Sensor (Ub = 24 V)	< 30 mA
Switching Frequency	100 Hz
Response Time	5 ms
Temperature Drift	< 10 %
Temperature Range	-25 ... 60 °C
Number of Switching Outputs	1
Switching Output Voltage Drop	< 0.8 V
PNP Switching Output/Switching Current	200 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Logic	no
Protection Class	III

Mechanical Data
Housing Material	Plastic, PBT
Full Encapsulation	yes
Degree of Protection	IP54
Connection	M12 × 1; 4-pin
Weight	107 g

Output
PNP NO	yes

Standards and certificates

Connection Diagram

Ctrl. Panel
01 = Switching Status Indicator

Dimensioned Picture
Dimensions specified in mm (1 mm = 0.03937") 1 = Transmitter Diode 2 = Receiver Diode

Reflector data
RQ100BA	0.25 ... 6.5 m
RE18040BA	0.1 ... 4 m
RQ84BA	0.25 ... 5 m
RR84BA	0.2 ... 5 m
RE9538BA	0.15 ... 2 m
RR50_A	0.15 ... 3 m
RE6040BR	0.2 ... 2.5 m
RE8222BA	0.25 ... 1.8 m
ZRAE02B01	0.2 ... 1.8 m
ZRME03B01	0.15 ... 2 m
RF505	0.15 ... 1.9 m
RF508	0.15 ... 1.9 m
RF258	0.15 ... 1.5 m
ZRDF03K01	0.1 ... 3.5 m
ZRDF10K01	0.1 ... 4.5 m