text.skipToContent text.skipToNavigation

OPT1545 Reflex Sensor with Background Suppression

Available from stock
These sensors have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between rollers below the transport level. High-precision background suppression makes it possible to reliably detect even black objects at up to 900 mm. Settings are entered via wireless NFC, which is even possible in the de-energized state. Thanks to the innovative fast-clip mounting system and quick wiring, the sensors are installed and ready for use in no time flat.

Optical Data

Range 900 mm
Switching Hysteresis  < 5 %
Light Source Infrared Light
Wavelength 860 nm
Service Life (T = +25 °C) 100,000 h
Risk Group (EN 62471) 1
Max. Ambient Light 90,000 Lux
Opening Angle 3 °

Electrical Data

Supply Voltage 12 ... 30 V DC
Current Consumption Sensor (Ub = 24 V) < 16 mA
Switching Frequency 100 Hz
Response Time 5 ms
Temperature Drift < 5 %
Temperature Range -40 ... 60 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 0.9 V
PNP Switching Output/Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Logic yes
Single Discharge yes
Block Forwarding yes
Output Magnetic Valve/Engine yes
Automatic Roller Shutdown yes
Protection Class III

Mechanical Data

Setting Method NFC
Housing Material Plastic, ABS-GF
Degree of Protection IP67
Connection M12 × 1; 4-pin
Cable Length 200 cm
Cable Jacket Material PVC
Weight 149 g

Output

PNP NO/NC switchable yes
NFC Receiver Category yes

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Connection Diagram

Switching Distance Deviation

Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
black 6 % remission
grey 18 % remission

Ctrl. Panel

2a = NFC interface
3a = Switching Status Indicator/Error Indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M4 = 0.5 Nm

Complementary Products

  • Adapter OPT70N, OPT70S, OPT70P
  • ZPTX001 Quick Mount
  • USB NFC Adapter
  • Software

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison