text.skipToContent text.skipToNavigation

P1NL404 Retro-Reflex Sensor Universal

Available from stock
The retro-reflex sensor works with a fine laser beam and a reflector. The laser class 1 collimated laser beam detects objects, for instance, when checking installation, feed or presence, starting at a size of 0.75 mm over the entire range. The IO-Link interface can be used to configure retro-reflex sensors (PNP/NPN, NC/NO, switching distance)and to output switching statuses and signal values.

Optical Data

Range 9,500 mm
Reference Reflector/Reflector Foil RE6151BM
Min. Distance to Reflector 0 mm
Smallest Recognizable Part see Table 2
Switching Hysteresis  < 15 %
Light Source Laser collimated (red)
Polarization Filter yes
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 1
Max. Ambient Light 10,000 Lux
Single-Lens Optic yes

Electrical Data

Supply Voltage 10 ... 30 V DC
Supply Voltage with IO-Link 18 ... 30 V DC
Current Consumption (Ub = 24 V) < 20 mA
Switching Frequency 5,000 Hz
Switching Frequency (interference-free mode) 2,500 Hz
Response Time 0.1 ms
Response time (interference-free mode) 0.2 ms
On-/Off-Delay 20 ms
Temperature Drift < 10 %
Temperature Range -25 ... 60 °C
Switching Output Voltage Drop < 2 V
Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Interface IO-Link V1.1
Protection Class III
FDA Accession Number 1911373-000

Mechanical Data

Setting Method Potentiometer
Housing Material Plastic, ABS/PC
Degree of Protection IP67/IP68
Connection M12 × 1; 4-pin
Optic Cover Plastic, PMMA
Weight 30 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 2,369.59 a

Output

IO-Link yes
PNP NO yes

Adjustable parameters

Output Push-pull
NPN
PNP
Circuit NC
NC/NO
NO
Other parameters Off-delay
On-delay
Mode of operation
Hysteresis
Emitted light
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Table 1

Working Distance 2 m 5 m 9,5 m
Light Spot Diameter 20 mm 50 mm 70 mm
Table 2
Distance, Sensor to Reflector 2 m 5 m 9,5 m
Smallest Recognizable Part 0,75 mm 5 mm 8 mm

Connection Diagram

Ctrl. Panel

01 = Switching Status Indicator
05 = Switching Distance Adjuster
68 = supply voltage indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Optical axis Screw M4 = 0.5 Nm

Reflector data

RQ100BA 0.07 ... 9.5 m
RE18040BA 0.07 ... 6 m
RQ84BA 0.07 ... 8 m
RR84BA 0.07 ... 9.5 m
RE9538BA 0 ... 3 m
RE6151BM 0 ... 9.5 m
RR50_A 0.06 ... 8.5 m
RE6040BA 0.07 ... 9 m
RE8222BA 0.06 ... 5 m
RR34_M 0 ... 4.5 m
RE3220BM 0 ... 5 m
RE6210BM 0 ... 2 m
RR25_M 0 ... 3.3 m
RR25KP 0 ... 1.3 m
RR21_M 0 ... 1.8 m
Z90R004 0.15 ... 3.9 m
Z90R005 0.15 ... 5.5 m
ZRAE02B01 0.07 ... 4.5 m
ZRME01B01 0 ... 1 m
ZRME03B01 0 ... 3.8 m
ZRMR02K01 0 ... 1.5 m
RF505 0 ... 1.5 m
RF508 0 ... 1.6 m
RF258 0 ... 1.5 m
ZRAF08K01 0 ... 1.5 m
ZRDF03K01 0 ... 6 m
ZRDF10K01 0 ... 6 m

Complementary Products

  • Reflector, Reflector Foil
  • Dust Extraction Tube STAUBTUBUS-03
  • IO-Link Master
  • Set Protective Housing Z1NS001
  • Software
Initial start-up instructions
Operating instructions
Product description file
Product description file
IODD_P1NL404_V1.0.2.zip
Interface protocol
Interface protocol
Interface_Protocol_IO-Link_Parameter_Process_Data_P1NLxxx.pdf
Declarations of Conformity / Approvals
Product certificates
Product certificates
P1NE_P1NH_P1NK_P1NL_IO-Link_V1.1_Manufacturer_declaration.pdf

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison