Features at a Glance
- Integrated output
- Especially suitable in applications where only minimal space is available
T1FL06VD Reflex Sensor Energetic
Available from stock
Added to Your Cart:
The transmitter and receiver in these sensors are located in a single housing. The sensor evaluates transmitted light reflected back from the object. The output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances.
Optical Data | |
|---|---|
| Range | 60mm |
| Switching Hysteresis | < 15% |
| Light Source | Infrared Light |
| Service Life (T = +25 °C) | 100,000h |
| Max. Ambient Light | 10,000Lux |
| Opening Angle | 25° |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 30mA |
| Switching Frequency | 2kHz |
| Response Time | 250µs |
| Temperature Drift | < 10% |
| Temperature Range | -25 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 100mA |
| Residual Current Switching Output | < 50µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Housing Material | Plastic, ABS/GF |
| Degree of Protection | IP67 |
| Connection | Cable; 3-wire |
| Cable length (L) | 2m |
| Cable Jacket Material | PVC |
| Wire cross-section | 0.09mm² |
| Weight | 52g |
General Data | |
|---|---|
| Scope of delivery |
1 × BEF-SET-23 mounting set 1 × initial start-up instructions 1 × sensor |
Output | |
|---|---|
| PNP NC | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Receiver Diode
2 = Transmitter Diode
Screw M2 = 0,3 Nm
|
ECAD data
