Features at a Glance
- Low switching distance deviation for black/white
- IO-Link 1.1
- Object detection over long distances
- Dynamic adjustment of the emitted light brightness
P1PH901 Reflex Sensor with Background Suppression
Available from stock
Added to Your Cart:
The reflex sensor with background suppression works with red light according to the time-of-flight measurement principle and is suitable for detecting objects against any background. The sensor always has the same switching distance, regardless of the color, shape or surface of the objects. The dynamic adjustment of the transmitted light brightness enables reliable switching with varying object and background properties. The sensor is suitable for presence checks with a large detection range, even under adverse ambient conditions, such as in the presence of ambient light or contamination. The IO-Link interface can be used to configure the reflex sensors (NC/NO, switching distance), as well as to output switching statuses.
Optical Data | |
|---|---|
| Range | 2,500mm |
| Setting Range | 200 ... 2,500mm |
| Switching Hysteresis | < 5% |
| Light Source | Red Light |
| Service Life (T = +25 °C) | 100,000h |
| Max. Ambient Light | 40,000Lux |
Electrical Data | |
|---|---|
| Supply Voltage | 15 ... 30V DC |
| Supply Voltage with IO-Link | 18 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 25mA |
| Switching Frequency | 200Hz |
| Switching Frequency (interference-free mode) | 40Hz |
| Response time (interference-free mode) | 13ms |
| Response Time | 2.5ms |
| Temperature Drift | < 10% |
| Temperature Range | -40 ... 60°C |
| Switching Output Voltage Drop | < 2V |
| Switching Output/Switching Current | 100mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection |
IP67 IP68 |
| Connection | M12 × 1; 4-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 33g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 1,079.75a |
General Data | |
|---|---|
| Scope of delivery |
1 × Z1PE002 mounting set 1 × initial start-up instructions 1 × sensor |
Output | |
|---|---|
| PNP NC, PNP NO | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Output | PNP |
| Circuit |
NC NO inactive Error output NC+NO |
| Other parameters |
Off-delay On-delay Mode of operation Hysteresis Switching point Emitted light |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Detection Range | 250 mm | 1200 mm | 2500 mm |
| Light Spot Diameter | 20 mm | 35 mm | 70 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
05 = Switching Distance Adjuster
68 = Power LED 5a = Switching Status Indicator, A1 |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
3 = Wrench Size 7
Screw M4 = 0.5 Nm
|
Reflector data | |
|---|---|
| white (90 %) | 2.5m |
| grey (18 %) | 2m |
| black (6 %) | 1.2m |
Complementary Products |
|---|
|
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
