text.skipToContent text.skipToNavigation

CP25QXVT80 Laser Distance Sensor Triangulation

Available from stock
These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color and brightness. Two independent switching outputs are available, at which two switching thresholds and one on-delay or off-delay time can be set in 10 ms increments. Sensor functions can be activated and values can be output via the RS-232 interface.

Optical Data

Range 240 mm
Setting Range 40 ... 240 mm
Switching Hysteresis  < 0.5 %
Light Source Laser (red)
Wavelength 655 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 2
Max. Ambient Light 10,000 Lux
Light Spot Diameter see Table 1

Electrical Data

Supply Voltage 10 ... 30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Switching Frequency 500 Hz
Response Time 1 ms
On-/Off-Delay (RS-232) 0 ... 1 s
Temperature Drift < 15 µm/K
Temperature Range -25 ... 60 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 1.5 V
Switching Output/Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Teach Mode HT, VT, TP
Baud Rate 38,400 Bd
Protection Class III
FDA Accession Number 0820586-000

Mechanical Data

Setting Method Teach-In
Housing Material Plastic, ABS
Plastic, PC
Degree of Protection IP67
Connection M12 × 1; 8-pin
Optic Cover Plastic, PMMA
Weight 84 g

Output

Error Output yes
PNP NO yes
RS-232 Interface yes

Adjustable parameters

Output Push-pull
NPN
PNP
Error Output
Other parameters Off-delay
On-delay
Exposure time
Teach mode
Switching hysteresis
Laser light
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Table 1

Detection Range 40 mm 240 mm
Spot Size 0,6 × 2,5 mm 1 × 4 mm

Connection Diagram

Ctrl. Panel

24 = Plus Button
25 = Minus Button
07 = Selector Switch
03 = Error Indicator
01 = Switching Status Indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M4 = 0.5 Nm

Complementary Products

  • Interface Cable S232W3
  • Protective Housing ZSV-0x-01
  • Set Protective Housing ZSP-NN-02
  • Software
Product Comparison