Features at a Glance
- Included: 1 × adapter block, 1 × reflector foil piece, 2 × M3 × 14 mm screws, 2 × M3 × 18 mm screws
- Double use as sensor and reflector holder possible
- Easy handling
Z1KC001 Mounting for reflectors with M3 mounting holes
Available from stock
Added to Your Cart:
The mounting is suitable for direct mounting, as the adapter block has an elongated T-slot bar that can be inserted into the T-slot. The bar is clamped in the T-slot with self-tapping screws. The included reflector foil can be stuck onto the free side of the adapter block.
Mechanical Data | |
|---|---|
| Thread | M3 |
| Mounting type, device-side |
can be screwed self-adhesive |
| Mounting type, system-side | Mounting profile |
| Material |
Plastic, PA Steel, galvanized |
| Structure | Continuous Structure |
| Weight | 8 g |
General Data | |
|---|---|
| Packaging unit | 1 Piece |
Standards and certificates |
|---|
|
|
Contour types |
|---|
|
|
Exploded view |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
3 × 12 screw = 0.8 Nm
|
