text.skipToContent text.skipToNavigation

SD4ICS13SE89 Safety Switch with Lock Function Electromagnetic, Power to Lock Principle

Available from stock
This innovative safety switch with lock function is suitable for process protection thanks to its locking force. Furthermore, a safety level of category 4 PL e (EN ISO 13849-1) can be fulfilled with just one safety switch with lock function and is retained even when connected in series. Reaction time and risk time remain unchanged when connected in series as well. Extensive diagnosis functions enhance system availability and simplify installation and maintenance. Thanks to the electromagnetic operating principle, the safety switches with lock function work in a fully contactless fashion and are thus wear-resistant and easy to clean.

Electrical Data

Sensor Type Locking unit
Supply Voltage 20.4 ... 26.4 V DC
Response Time < 150 ms
Risk time < 150 ms
Temperature Range -25 ... 55 °C
Storage temperature -25 ... 85 °C
Safety Output OSSD
Number of safety outputs (OSSDs) 2
PNP Safety Output/Switching Current < 250 mA
Number of Signal Outputs 1
PNP signal output switching current 50 mA
Short Circuit Protection yes
Protection Class II

Mechanical Data

Housing Material Plastic
Degree of Protection IP65/IP67
Connection M12 × 1; 8-pin
Latching Force, typical 30 ... 100 N
Weight 814 g

Safety-relevant Data

Operating principle Inductively coded
Coding Standard
Performance Level (EN ISO 13849-1) Cat. 4 PL e
PFHD 3,50 × E-9 1/h
Safety Integrity Level (EN 61508) SIL3
Safety Integrity Level (EN 62061) SILCL3
PDDB (EN 60947-5-3) yes
Locking Device Power to lock principle
Locking Force F, guaranteed 500 N
Locking Force Fmax, typical 750 N

General Data

Applicable actuator SD4ICA01

Function

Series Connection yes
Actuator monitored yes
Electrical Detent Mechanism yes

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf
Adjusting Target must be ordered separately (not included in delivery)

Connection Diagram

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")

Complementary Products

  • Safety Relay SR4B3B01S, SR4D3B01S
  • Adjusting Target Z0048
  • Software
Operating instructions
System solution
Declarations of Conformity / Approvals
Product Comparison