Features at a Glance
- Special alignment optic
EW98PC3 Through-Beam Sensor
Available from stock
Added to Your Cart:
These through-beam sensors are best suited for use in industrial environments. Thanks to their large working range, the devices demonstrate excellent functional reliability in highly contaminated environments. The sensors can be checked for correct functioning via the test input.
Optical Data | |
|---|---|
| Range | 10,000mm |
| Switching Hysteresis | < 15% |
| Light Source | Red Light |
| Service Life (T = +25 °C) | 100,000h |
| Max. Ambient Light | 10,000Lux |
| Opening Angle | 6° |
Electrical Data | |
|---|---|
| Sensor Type | Receiver |
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 40mA |
| Switching Frequency | 150Hz |
| Response Time | 3,300µs |
| Temperature Drift | < 10% |
| Temperature Range | -10 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 200mA |
| Residual Current Switching Output | < 50µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material |
Stainless steel, V2A (1.4305 / 303) Plastic, PBT |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 41g |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × MUTTER-M18-E003 hex nut 1 × sensor |
Output | |
|---|---|
| PNP NO | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
05 = Switching Distance Adjuster
02 = Contamination Warning 01 = Switching Status Indicator 08 = NO/NC Switch |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Alignment aid/function indicator
2 = Receiver Diode
|
Complementary Products |
|---|
|
ECAD data
