OPT175-P08 Retro-Reflex Sensor for Roller Conveyor Systems

Usually ready to ship in 7 days after order is received.

Added to Your Cart:

Added to your request list:

These sensors have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between two rollers below the conveyor level. They are thus protected against mechanical damage.

Features at a Glance

Fully encapsulated
Integrated logic
Recognition of high-gloss and jet black objects
Large working range

Technical data

Optical Data
Range	6,500 mm
Reference Reflector/Reflector Foil	RQ100BA
Min. Distance to Reflector	100 mm
Switching Hysteresis	< 15 %
Light Source	Red Light
Polarization Filter	yes
Service Life (T = +25 °C)	100,000 h
Max. Ambient Light	10,000 Lux
Opening Angle	5 °
Two-Lens Optic	yes

Electrical Data
Supply Voltage	18 ... 30 V DC
Current Consumption Sensor (Ub = 24 V)	< 25 mA
Switching Frequency	100 Hz
Response Time	5 ms
Temperature Drift	< 10 %
Temperature Range	-15 ... 50 °C
Number of Switching Outputs	1
Switching Output Voltage Drop	< 0.8 V
PNP Switching Output/Switching Current	200 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Logic	yes
Single Discharge	yes
Block Forwarding	yes
Solenoid Valve	yes
Protection Class	III

Mechanical Data
Housing Material	Plastic, PBT
Full Encapsulation	yes
Degree of Protection	IP65
Connection	M12 × 1; 4-pin
Cable Length	2 m
Cable Jacket Material	PVC
Weight	276 g

Pneumatic Solenoid Valve Unit
Valve no.	K03
Supply Voltage Valve	21.6 ... 26.4 V
Current Consumption Valve	42 mA
Operating Pressure	0 ... 8 bar
Nominal Width	0.9 mm
Nominal flow rate 1 -> 2	22 NL/min
Nominal flow rate 2 -> 3	25 NL/min
Supply-Line Connector Pipe	2× 8×1
Working-Line Connector Pipe	4×1
Valve function	3/2-Way
Switching function	NO