Features at a Glance
- Large working range
- Fully encapsulated
- Recognition of high-gloss and jet black objects
- Integrated logic
OPT162-P04 Retro-Reflex Sensor for Roller Conveyor Systems
These sensors have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between two rollers below the conveyor level. They are thus protected against mechanical damage.
Optical Data | |
|---|---|
| Range | 6,500 mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Min. Distance to Reflector | 100 mm |
| Switching Hysteresis | 15 % |
| Light Source | Red Light |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Opening Angle | 5 ° |
| Two-Lens Optic | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption Sensor (Ub = 24 V) | < 25 mA |
| Switching Frequency | 100 Hz |
| Response Time | 5 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -15 ... 50 °C |
| Number of Switching Outputs | 1 |
| Switching Output Voltage Drop | < 0.8 V |
| PNP Switching Output/Switching Current | 200 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Logic | yes |
| Single Discharge | yes |
| Block Forwarding | yes |
| Solenoid Valve | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic |
| Full Encapsulation | yes |
| Degree of Protection | IP65 |
| Connection | M12 × 1; 4-pin |
| Cable length (L) | 1 m |
| Weight | 276 g |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor |
Pneumatic Solenoid Valve Unit | |
|---|---|
| Valve no. | K04 |
| Supply Voltage Valve | 19.2 ... 28.8 V |
| Current Consumption Valve | 86 mA |
| Operating Pressure | 4 ... 7 bar |
| Nominal Width | 0.8 mm |
| Nominal flow rate 1 -> 2 | 20 NL/min |
| Nominal flow rate 2 -> 3 | 100 NL/min |
| Supply-Line Connector Pipe | 2× 8×1 |
| Working-Line Connector Pipe | 4×1 |
| Valve function | 3/2-Way |
| Switching function | NC |
Output | |
|---|---|
| PNP NO | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
|
Reflector data | |
|---|---|
| RQ100BA | 0.25 ... 6.5 m |
| RE18040BA | 0.1 ... 4 m |
| RQ84BA | 0.25 ... 5 m |
| RR84BA | 0.2 ... 5 m |
| RE9538BA | 0.15 ... 2 m |
| RR50_A | 0.15 ... 3 m |
| RE6040BR | 0.2 ... 2.5 m |
| RE8222BA | 0.25 ... 1.8 m |
| ZRAE02B01 | 0.2 ... 1.8 m |
| ZRME03B01 | 0.15 ... 2 m |
| RF505 | 0.15 ... 1.9 m |
| RF508 | 0.15 ... 1.9 m |
| RF258 | 0.15 ... 1.5 m |
| ZRDF03K01 | 0.1 ... 3.5 m |
| ZRDF10K01 | 0.1 ... 4.5 m |
Complementary Products |
|---|
|
