Features at a Glance
- Simple installation
- Teach-in, external teach-in
XR96PCT2 Retro-Reflex Sensor Universal
Available from stock
Added to Your Cart:
A reflector must be used in combination with these sensors. wenglor has the right retro-reflex sensor for every application. Because of the M18 threaded connector, the sensor is easy to install and protected mechanically. A time delay can only be activated via the RS-232 interface.
Optical Data | |
|---|---|
| Range | 12,000mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Switching Hysteresis | < 5% |
| Light Source | Laser (red) |
| Wavelength | 655nm |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000h |
| Laser Class (EN 60825-1) | 2 |
| Max. Ambient Light | 10,000Lux |
| Beam Divergence | 5mrad |
| Focus Distance | 500mm |
| Single-Lens Optic | yes |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 40mA |
| Switching Frequency | 2kHz |
| Response Time | 250µs |
| On-/Off-Delay (RS-232) | 0 ... 5s |
| Temperature Drift | < 5% |
| Temperature Range | -10 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 200mA |
| Residual Current Switching Output | < 50µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Teach Mode | NT, MT |
| Protection Class | III |
| FDA Accession Number | 0820374-000 |
Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material | Plastic, PBT |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 28g |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × laser warning sign 1 × MUTTER-M18-E012 hex nut 1 × sensor |
Output | |
|---|---|
| PNP NC | yes |
| External teach-in input | yes |
| RS-232 with Adapterbox | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC/NO NO |
| Other parameters |
Off-delay On-delay |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
30 = Switching Status/Contamination Warning
06 = Teach Button |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
Screw M4 = 0.5 Nm
|
Reflector data | |
|---|---|
| RQ100BA | 0 ... 12m |
| RE18040BA | 0 ... 8m |
| RQ84BA | 0 ... 10m |
| RR84BA | 0 ... 15m |
| RE9538BA | 0 ... 6m |
| RE6151BM | 0 ... 10m |
| RE6151BA | 0 ... 4m |
| RR50_A | 0 ... 9m |
| RE6040BA | 0 ... 10m |
| RE8222BA | 0 ... 6m |
| RR34_M | 0 ... 6m |
| RE3220BM | 0 ... 5m |
| RE6210BM | 0 ... 4.5m |
| RR25_M | 0 ... 5m |
| RR25KP | 0 ... 3m |
| RR21_M | 0 ... 3m |
| ZRAE02B01 | 0 ... 6m |
| ZRME01B01 | 0 ... 2m |
| ZRME03B01 | 0 ... 6m |
| ZRMR02K01 | 0 ... 3m |
| ZRMS02_01 | 0 ... 2.5m |
| RF505 | 0 ... 4m |
| RF255 | 0 ... 3.5m |
| RF508 | 0 ... 3m |
| RF258 | 0 ... 3m |
| ZRDF__K01 | 0 ... 8m |
| RE9444BH | 1 ... 2m |
Complementary Products |
|---|
|
ECAD data
