Features at a Glance
- Low current consumption < 15 mA
- High switching frequency
- Laser light
- Miniature design
OYKS934 Reflex Sensor with Background Suppression
Available from stock
Added to Your Cart:
These sensors detect distance by measuring angles. They are particularly good at recognizing objects in front of any background. The color, shape and surface characteristics of the object have practically no influence on sensor switching performance.
This product has been discontinued, but is still available as a spare part.
Optical Data | |
|---|---|
| Range | 80mm |
| Setting Range | 18 ... 80mm |
| Switching Hysteresis | < 10% |
| Light Source | Laser (red) |
| Wavelength | 655nm |
| Service Life (T = +25 °C) | 100,000h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000Lux |
| Light Spot Diameter | see Table 1 |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 15mA |
| Switching Frequency | 1,900Hz |
| Response Time | 263µs |
| Temperature Drift | < 5% |
| Temperature Range | -40 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 100mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
| FDA Accession Number | 1120743-000 |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, PBT |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Cable length (L) | 200mm |
| Weight | 22g |
General Data | |
|---|---|
| Scope of delivery |
1 × BEF-SET-01 mounting set 1 × initial start-up instructions 1 × sensor |
Output | |
|---|---|
| PNP NC, PNP NO | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC+NO NO |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
* Temperature range with permanently installed cable, bending radius: > 20 mm
Table 1 |
||
|---|---|---|
| Detection Range | 40 mm | 80 mm |
| Light Spot Diameter | 1,5 mm | 1 mm |
Connection Diagram |
|---|
|
|
Switching Distance Deviation |
|---|
|
Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
 black 6 % remission grey 18 % remission |
Ctrl. Panel |
|---|
|
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Receiver Diode
2 = Transmitter Diode
Screw M3 = 1 Nm
|
Complementary Products |
|---|
|
ECAD data
