Features at a Glance
- Go/no-go testing possible
- Red light
- Digital, analog and error output
- Triple beam correction principle
HT60MGV80 Reflex Sensor with Background Suppression
Available from stock
Added to Your Cart:
These sensors are equipped with an analog output, as well as a digital output. The upper and lower switching points of the digital output can be adjusted with two potentiometers. The digital output is activated when an object is located within the window defined in this way.
This product has been discontinued, but is still available as a spare part.
Optical Data | |
|---|---|
| Working Range | 300 ... 600mm |
| Measuring Distance | 450mm |
| Measuring Range | 300mm |
| Resolution | see Table 1 |
| Linearity | 1% |
| Switching Hysteresis | 20mm |
| Light Source | Red Light |
| Wavelength | 660nm |
| Service Life (T = +25 °C) | 100,000h |
| Max. Ambient Light | 10,000Lux |
| Light Spot Diameter | see Table 1 |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 50mA |
| Cut-Off Frequency | 50Hz |
| Response Time | 10ms |
| Temperature Drift | 100µm/K |
| Temperature Range | -10 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 200mA |
| Error Output Voltage Drop | < 2.5V |
| PNP Error Output/Switching Current | 200mA |
| Analog Output | 0...10 V |
| Output Current Analog Output | 500µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Housing Material | Plastic, PBT |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 8-pin |
| Weight | 191g |
General Data | |
|---|---|
| Scope of delivery |
1 × BEF-SET-03 mounting set 1 × initial start-up instructions 1 × sensor |
Output | |
|---|---|
| Error Output | yes |
| PNP NO | yes |
| Analog Output | yes |
Standards and certificates |
|---|
|
|
Table 1 |
|||
|---|---|---|---|
| Working Distance | 300 mm | 450 mm | 600 mm |
| Light Spot Diameter | 10 mm | 15 mm | 20 mm |
| Resolution | 0,3 mm | 2 mm | 5 mm |
Connection Diagram |
|---|
|
|
Error of Measurement |
|---|
|
Typical characteristic curve based on white, 90 % remission
S = Measuring Distance
dS = Deviation
 black 6 % remission grey 18 % remission |
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
13 = Upper Potentiometer 14 = Lower Potentiometer 33 = Analog Voltage Output-/Error Warning |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Receiver Diode
2 = Transmitter Diode
3 = Receiver Diode
Screw M4 = 1 Nm
|
Complementary Products |
|---|
|
ECAD data
