OCPS885 Laser Distance Sensor Triangulation

Available from stock

Added to Your Cart:

Added to your request list:

These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color and brightness. Two independent switching outputs are available, at which two switching thresholds and one on-delay or off-delay time can be set in 10 ms increments. Sensor functions can be activated and values can be output via the RS-232 interface.

Features at a Glance

CMOS line array
Highly accurate switching distance
Minimal switching hysteresis
Switching point independent of material, color and brightness

Technical data

Optical Data
Range	660 mm
Setting Range	60 ... 660 mm
Switching Hysteresis	< 1 %
Light Source	Laser (red)
Wavelength	655 nm
Service Life (T = +25 °C)	100,000 h
Laser Class (EN 60825-1)	1
Max. Ambient Light	10,000 Lux
Light Spot Diameter	see Table 1

Electrical Data
Supply Voltage	10 ... 30 V DC
Current Consumption (Ub = 24 V)	< 50 mA
Switching Frequency	100 Hz
Response Time	< 5 ms
On-/Off-Delay (RS-232)	0 ... 1 s
Temperature Drift	< 50 µm/K
Temperature Range	-25 ... 60 °C
Number of Switching Outputs	2
Switching Output Voltage Drop	< 1.5 V
Switching Output/Switching Current	200 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Teach Mode	HT, VT, FT, TP
Baud Rate	9,600 Bd
Protection Class	III

Mechanical Data
Setting Method	Teach-In
Housing Material	Plastic, ABS Plastic, PC
Degree of Protection	IP67
Connection	M12 × 1; 4/5-pin
Optic Cover	Plastic, PMMA
Weight	43 g

Safety-relevant Data
MTTFd (EN ISO 13849-1)	918.59 a

Output
Error Output	yes
PNP NC	yes
RS-232 with Adapterbox	yes
External teach-in input	yes

Adjustable parameters
Output	Error Output Push-pull NPN PNP
Circuit	NC NC/NO NO
Other parameters	Off-delay On-delay
All other parameters can be found in the product documentation.