Features at a Glance
- Secure detection of black objects also in extremely inclined positions with wintec
- No mutual interference with wintec
- Interference-free towards gloss in the background with wintec
- Reliable in case of glossy objects with wintec
- Miniature design
P1KY002 Laser Distance Sensor Time of Flight
Available from stock
Added to Your Cart:
These miniature sensors determine distance between the sensor and the object by means of transit time measurement.
wenglor's interference-free technology (wintec) is revolutionizing sensor technology: it prevents numerous sensors arranged directly opposite or next to each other from interfering with one another. The sensors reach a very high switching frequency and use laser class 1, which is safe for the human eye.
Optical Data | |
|---|---|
| Working Range | 0 ... 1,000mm |
| Setting Range | 100 ... 1,000mm |
| Switching Hysteresis | < 20mm |
| Light Source | Laser (red) |
| Wavelength | 680nm |
| Service Life (T = +25 °C) | 100,000h |
| Laser Class (EN 60825-1) | 1 |
| Beam Divergence | < 16mrad |
| Max. Ambient Light | 10,000Lux |
| Light Spot Diameter | see Table 1 |
| Triple Dot Laser | yes |
| Reflector required | no |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 30mA |
| Switching Frequency | 1,000Hz |
| Response Time | 0.5ms |
| Temperature Drift | < 2.5% |
| Temperature Range | -40 ... 50°C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 100mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
| FDA Accession Number | 1620293-001 |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material |
Plastic, ABS/PC Plastic, PC |
| Optic Cover | Plastic, PMMA |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Cable length (L) | 200mm |
| Weight | 21g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 996.97a |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor |
Output | |
|---|---|
| PNP NC, PNP NO | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NO NC+NO |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
* Temperature range with permanently installed cable, bending radius: > 20 mm
Table 1 |
|||
|---|---|---|---|
| Working Distance | 100 mm | 500 mm | 1000 mm |
| Light Spot Diameter | 4 mm | 7 mm | 15 mm |
Connection Diagram |
|---|
|
|
Switching Distance Deviation |
|---|
|
Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
 black 6 % remission grey 18 % remission |
Ctrl. Panel |
|---|
|
68 = Power LED
05 = Switching Distance Adjuster 30 = Switching Status/Contamination Warning |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M3 = 0,5 Nm
|
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
