Features at a Glance
- Graphical display for easy operation
- Analog output (0...10 V/4...20 mA)
- Secure detection of black objects also in extremely inclined positions with wintec
- Reliable in case of glossy objects with wintec
- 2 mutually independent switching outputs
OY1P303P0102 Laser Distance Sensor Time of Flight
Available from stock
Added to Your Cart:
These sensors have scratch-resistant optics and the emitted light can be switched off. They use the transit time measurement principle to measure the distance between the sensor and the object.
wenglor interference-free technology (wintec) has revolutionized sensor technology:
It makes it possible to mount several sensors directly next to, or opposite each other without the sensors influencing each other. The sensors reach a very high switching frequency and use laser class 1, which is safe for the human eye.
Optical Data | |
|---|---|
| Working Range | 50 ... 3,050mm |
| Measuring Range | 3,000mm |
| Reproducibility maximum | 1mm |
| Linearity Deviation (200…3050 mm) | 7mm |
| Linearity Deviation (50…200 mm) | 15mm |
| Switching Hysteresis | 3 ... 20mm |
| Light Source | Laser (red) |
| Wavelength | 660nm |
| Service Life (T = +25 °C) | 100,000h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000Lux |
| Beam Divergence | < 2mrad |
| Reflector required | no |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 70mA |
| Switching Frequency | 250Hz |
| Measuring Rate | 1 ... 500/s |
| On-/Off-Delay | 0 ... 10,000ms |
| Temperature Drift | < 0.4mm/K |
| Temperature Range | -40 ... 50°C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 2.5V |
| Switching Output/Switching Current | 100mA |
| Analog Output | 4...20 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | HT, VT, FT, TP |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Menu (OLED) |
| Housing Material |
Plastic, ABS Plastic, PC |
| Optic Cover | Plastic, PMMA |
| Degree of Protection | IP68 |
| Connection | M12 × 1; 4-pin |
| Functions |
Off-Delay On-Delay |
| Weight | 43g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 349.73a |
General Data | |
|---|---|
| Scope of delivery |
1 × BEF-SET-44 mounting set 1 × initial start-up instructions 1 × sensor |
Output | |
|---|---|
| Error Output | yes |
| Analog Output | yes |
| External teach-in input | yes |
| IO-Link | yes |
Adjustable parameters | |
|---|---|
| Analog output |
0...10 V 4...20 mA |
| Output |
Analog Output Error Output Push-pull NPN PNP Contamination Output |
| Other parameters |
Off-delay Scale analog output On-delay Filter Hysteresis Emitted light Teach mode |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Display brightness may decrease with age. This does not result in any impairment of the sensor function.
Table 1 |
||
|---|---|---|
| Working Distance | 0 m | 3 m |
| Light Spot Diameter | 5 mm | 9 mm |
Connection Diagram |
|---|
|
|
Switching Distance Deviation |
|---|
|
Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
 black 6 % remission grey 18 % remission Aluminum |
Ctrl. Panel |
|---|
|
20 = Enter key
22 = Up key 23 = Down key 60 = display |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M4 = 0.5 Nm
|
Complementary Products |
|---|
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
