Features at a Glance
- Repetition accuracy: 5 µm
- Teach-in
- Recognition of transparent objects
- Fine light beam (0,6 mm) over entire width of fork
YH03NCT8 Fork Sensor
Available from stock
Added to Your Cart:
The transmitter and the receiver are integrated into a single housing as a light barrier. If the active light beam between the transmitter and the receiver is interrupted, the output is switched accordingly.
Thanks to the use of visible laser light, the sensor is very easy to align to the object. The use of a fine light beam ensures a small diameter spot over the entire width of the fork. This allows for the recognition of extremly small parts, holes, slots and notches.
Optical Data | |
|---|---|
| Fork Width | 30mm |
| Smallest Recognizable Part | 40µm |
| Smallest Detectable Gap | 50µm |
| Switching Hysteresis | < 20µm |
| Light Source | Laser (red) |
| Wavelength | 655nm |
| Service Life (T = +25 °C) | 100,000h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000Lux |
| Light Spot Diameter | 0.6mm |
| Repeat Accuracy | < 5µm |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 50mA |
| Switching Frequency | 10kHz |
| Response Time | 50µs |
| Off-Delay | 0 ... 100ms |
| Temperature Range | -25 ... 60°C |
| Switching Output Voltage Drop | < 1.5V |
| NPN Switching Output/Switching Current | 200mA |
| Internal Load Switching Output | 5,100Ohm |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | NT, MT |
| Protection Class | III |
| FDA Accession Number | 2510938-000 |
Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material |
Plastic, PA Steel, nickel-plated |
| Optic Cover | Plastic, PC |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M8 × 1; 3-pin |
| Weight | 100g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 1,436.4a |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor |
Output | |
|---|---|
| NPN NO | yes |
Adjustable parameters | |
|---|---|
| Circuit |
NC NC/NO NO |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
02 = Contamination Warning 07 = Selector Switch 06 = Teach Button |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
Screw M4 = 1 Nm
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
