Features at a Glance
- Linear output signal proportional to distance
- Usable with or without glass fiber-optic cable
- Analog output (0...10 V DC)
UF55MG3 Fiber-optic amplifier
Available from stock
Added to Your Cart:
This sensor is suitable for analog distance measurements and can be used with or without a glass fiber cable. The output voltage is dependent upon the brightness of the object to be measured, as bright objects reflect transmitted light better than dark objects.
Optical Data | |
|---|---|
| Functional principle | |
| Working Range | 50 ... 500mm |
| Measuring Range | 450mm |
| Resolution | 10mm |
| Linearity | 5% |
| Light Source | Infrared Light |
| Wavelength | 880nm |
| Service Life (T = +25 °C) | 100,000h |
| Max. Ambient Light | 10,000Lux |
| Opening Angle | 12° |
Electrical Data | |
|---|---|
| Supply Voltage | 20 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 40mA |
| Switching Frequency | 50Hz |
| Response Time | 10ms |
| Temperature Drift | 1mm/K |
| Temperature Range | -10 ... 60°C |
| Analog Output | 0...10 V |
| Output Resistance Analog Output | 1kOhm |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Brass, nickel-plated |
| Optic Cover | Glass |
| Full Encapsulation | yes |
| Degree of Protection | IP65 |
| Connection | M12 × 1; 4-pin |
| Weight | 139g |
General Data | |
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor 1 × UEM30KU-01 sleeve nut 2 × MUTTER-M30-E001 hex nuts |
Output | |
|---|---|
| Analog Output | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
16 = Working Distance Adjustment
12 = Analog Output Indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
|
Complementary Products |
|---|
|
ECAD data
