Features at a Glance
- Key potentiometer, teach-in
- Large detection and working range
- Recognition of transparent objects
DX22PCT8 Fiber-optic amplifier
Plastic fiber-optic cable with outside diameters of 1 mm and 2,2 mm can be connected to this sensor. The easy to use teach-in function allows for fine sensor adjustment, so that even transparent objects can be reliably recognized in through-beam mode operation. Scanning width is automatically adapted to each individual application via external teach-in. The devices can be easily mounted to standard DIN rails.
Optical Data | |
|---|---|
| Switching Hysteresis | 15 % |
| Light Source | Red Light |
| Wavelength | 660 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Switching Frequency | 2 kHz |
| Response Time | 250 µs |
| On-/Off-Delay | 0 ... 200 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25 ... 60 °C |
| Switching Output Voltage Drop | < 2.5 V |
| PNP Switching Output/Switching Current | 200 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | NT, MT, ZT, DT, TP |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material | Plastic |
| Full Encapsulation | yes |
| Degree of Protection | IP65 |
| Connection | M8 × 1; 3-pin |
| DIN-Rail mounting | 35 mm |
| Weight | 25 g |
Output | |
|---|---|
| PNP NO/NC switchable | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
07 = Selector Switch
02 = Contamination Warning 01 = Switching Status Indicator 24 = Plus Button 25 = Minus Button |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
|
Complementary Products |
|---|
|
