Features at a Glance
- Sensitivity adjustable
- Adaptable for glass fiber-optic cable
- Contamination warning
OPT106 Fiber-optic amplifier Continuous Light Sensor
Available from stock
Added to Your Cart:
wenglor’s continuous light sensor detects whether light is emitted from a light source (flame, LED, lamp). This means that LEDs, for example, can be monitored.
Optical Data | |
|---|---|
| Minimum quantity of light | 10Lux |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 15mA |
| Switching Frequency | 300Hz |
| Response Time | 1,660µs |
| Temperature Drift | < 10% |
| Temperature Range | -10 ... 60°C |
| Switching Output Voltage Drop | < 2.5V |
| PNP Switching Output/Switching Current | 200mA |
| Residual Current Switching Output | < 50µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Brass, nickel-plated |
| Full Encapsulation | yes |
| Degree of Protection | IP65 |
| Connection | Cable; 3-wire |
| Cable length (L) | 2m |
| Wire cross-section | 0.5mm² |
| Weight | 174g |
General Data | |
|---|---|
| Scope of delivery |
1 × BEF-SET-10 mounting set 1 × sensor |
Output | |
|---|---|
| PNP NO | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
|
Complementary Products |
|---|
|
