IM020BM37VD Inductive Sensor with Standard Switching Distances
Available from stock
Added to Your Cart:
This product has been discontinued, but is still available as a spare part.
Inductive Data | |
|---|---|
| Switching Distance | 2mm |
| Correction Factors Stainless Steel V2A/CuZn/Al | 0,73/0,55/0,45 |
| Mounting | Flush |
| Mounting A/B/C/D in mm | 0/16/6/0 |
| Switching Hysteresis | < 15% |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 6mA |
| Switching Frequency | 1,500Hz |
| Temperature Drift | < 10% |
| Temperature Range | -25 ... 80°C |
| Switching Output Voltage Drop | < 2.5V |
| Switching Output/Switching Current | 200mA |
| Residual Current Switching Output | < 100µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Housing Material | Brass, nickel-plated |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | Cable; 3-wire |
| Cable length (L) | 2m |
| Wire cross-section | 0.14mm² |
| Weight | 49g |
General Data | |
|---|---|
| Scope of delivery |
1 × MUTTER-M8-E002 hex nut 1 × sensor |
Output | |
|---|---|
| PNP NC | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Mounting |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Switching Status Indicator
|
