text.skipToContent text.skipToNavigation

Features at a Glance

Easy sensor configuration using the IO-Link interface
Minimal mounting clearance thanks to wenglor weproTec
Innovative ASIC circuit technology
Integrated error display and error output
Adjustable switching distance

I12H020 Inductive Sensor with IO-Link

Available from stock

Added to Your Cart:

Added to your request list:

The Inductive Sensors have not only been equipped with ASIC, but rather with an IO-Link interface as well for ideal integration into networks. As a result, a total of three switching distances and two switching frequencies can be selected, and PNP/NPN as well as NO/NC/antivalent options can be set as desired. This reduces the number of variants while simultaneously expanding the scope of functions.

Features at a Glance

Easy sensor configuration using the IO-Link interface
Minimal mounting clearance thanks to wenglor weproTec
Innovative ASIC circuit technology
Integrated error display and error output
Adjustable switching distance

Technical data

Inductive Data
Switching Distance	12 mm
Standard Target	36 × 36 mm
Correction Factors Stainless Steel V2A/CuZn/Al	1,05/0,54/0,52
Mounting	Non-flush
Mounting A/B/C/D in mm	20/40/36/14
Mounting B1 in mm	0...14
Switching Hysteresis	< 10 %

Electrical Data
Supply Voltage	10 ... 30 V DC
Supply Voltage with IO-Link	18 ... 30 V DC
Current Consumption (Ub = 24 V)	< 14 mA
Switching Frequency	360 Hz
Temperature Drift	< 10 %
Temperature Range	-40 ... 80 °C
Switching Output Voltage Drop	< 1 V
Switching Output/Switching Current	150 mA
Residual Current Switching Output	< 100 µA
Short Circuit Protection	yes
Overload Protection	yes
Reverse Polarity Protection	yes
Interface	IO-Link V1.1
Protection Class	III