IX130RM65MG3 Inductive Sensor with Analog Output
Available from stock
Added to Your Cart:
Inductive Data | |
|---|---|
| Working Range | 3 ... 13mm |
| Measuring Distance | 8mm |
| Measuring Range | 10mm |
| Correction Factors Stainless Steel V2A/CuZn/Al | 1/1/1 |
| Mounting | Non-flush |
| Mounting A/B/C/D in mm | 30/30/36/20 |
| Standard Target FE360, thickness 1 mm | 39 × 39mm |
| Linearity | < 1% |
| Resolution | 4µm |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30V DC |
| Current Consumption (Ub = 24 V) | < 30mA |
| Cut-Off Frequency | 900Hz |
| Temperature Drift | 10µm/K |
| Temperature Range | -10 ... 70°C |
| Analog Output | 0...10 V |
| Load Current Voltage Output | < 1mA |
| Resistant to Magnetic Fields | yes |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Housing Material | Brass, nickel-plated |
| Sensing face | Plastic, PBT |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
| Weight | 80g |
General Data | |
|---|---|
| Stock Type | X |
| Scope of delivery |
1 × initial start-up instructions 1 × MUTTER-M30-E001 hex nut 1 × sensor |
| Packaging unit | 1 Piece |
Output | |
|---|---|
| Analog Output | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Mounting |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Analog Output Indicator
|
Complementary Products |
|---|
|
ECAD data
