Features at a Glance
- Large temperature range from -60 to 450° C
- Long service life of up to 100 000 hours
- Quickly interchangeable sensor head
INRT007 Inductive Sensor for Extreme Temperature Ranges
Available from stock
Added to Your Cart:
The sensors consist of a sensor head and an analysis module, and are laid out for use in very hot work environments. Together with unparalleled service life in hot surroundings, large switching distances assure maximum system availability. Easily interchangeable sensor heads with numerous standard cable lengths are additionally available as separate replacement parts.Switching distance can be quickly adjusted via a potentiometer within a temperature range of -60 to 450° C.
Inductive Data | |
|---|---|
| Switching Distance | 25 mm |
| Correction Factors Stainless Steel V2A/CuZn/Al | 1,27/1,29/1,33 |
| Mounting | Non-flush |
| Mounting A/B/C/D in mm | 95/200/40/85 |
| Switching Hysteresis | < 10 % |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 70 mA |
| Switching Frequency | 200 Hz |
| Sensor head temperature range | -60 ... 450 °C |
| Analysis module temperature range | 0 ... 50 °C |
| Number of Switching Outputs | 2 |
| Switching Output Voltage Drop | < 3.5 V |
| Switching Output/Switching Current | 50 mA |
| Residual Current Switching Output | < 10 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
| Service Life | 100,000 h |
Mechanical Data | |
|---|---|
| Sensing face | Ceramic |
| Sensor head material | Aluminum, anodised |
| Analysis module material | Aluminum, powder-coated |
| Degree of protection, sensor head | IP60 |
| Degree of protection, analysis module | IP67 |
| Connection | M12 × 1; 4-pin |
| Cable Length | 10 m |
| Cable Jacket Material | Stainless steel, V2A (1.4301 / 304) |
| Outer diameter cable | 6.6 mm |
| PWIS-free | yes |
| Weight | 1,870 g |
Output | |
|---|---|
| PNP NC, PNP NO | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Switching Distance Deviation |
|---|
|
Tu = Ambient temperature
Sn = Nominal Switching Distance
 Switching Point Switching output on |
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
05 = Switching Distance Adjuster 68 = supply voltage indicator |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Switching Status Indicator
2 = Supply Voltage Indicator
|
ECAD data
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
