Features at a Glance
- Flexible soft binder on the sensor
- Intuitive operating concept with IO-Link interface
- Correction factor 1
- Plug and Play
- Separable housing
IR3F001 Inductive Sensor Ring sensor
Available from stock
Added to Your Cart:
The inductive ring sensor with separable housing enables quick and flexible mounting on various objects, such as hoses. Its compact construction, with a switching status indicator visible on all sides and a cable outlet in the hose direction, is particularly well suited for confined spaces. It is intuitive to operate via the potentiometer or the IO-Link interface. The sensor switches independently of the material thanks to correction factor 1. Frequency switching enables the operation of several sensors in the immediate vicinity without mutual interference.
Inductive Data | |
|---|---|
| Inside diameter | 15.1 mm |
| Installation A/Bx/By/C in mm | 0/30/50/5 |
| Installation A/Bx/By/C in mm with frequency switching | 0/0/0/5 |
| Functional principle | Static |
| Smallest recognizable object (Ø) | 3 mm* |
| Correction Factors Stainless Steel V2A/CuZn/Al | 1/1/1 |
Electrical Data | |
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 20 mA |
| Object speed | 0.1 ... 50 m/s |
| Response Time | < 300 µs |
| Ready-state delay | < 1.5 s |
| Switching Output Voltage Drop | 1.5 V |
| Temperature Range | 0 ... 60 °C |
| Short Circuit Protection | yes |
| Reverse Polarity and Overload Protection | yes |
| Switching Output/Switching Current | 100 mA |
| Pulse extension | 200 ms |
| Interface | IO-Link V1.1 |
Mechanical Data | |
|---|---|
| Connection | M8 × 1; 4-pin |
| Setting Method | Potentiometer/IO-Link |
| Hanger opening/closing cycles | Max. 100 |
| Degree of Protection | IP54 |
| Weight | 27 g |
General Data | |
|---|---|
| Scope of delivery | |
| Packaging unit | 1 Piece |
Output | |
|---|---|
| PNP NO | yes |
Adjustable parameters | |
|---|---|
| Output |
PNP Push-pull NPN |
| Circuit |
NO NC NC/NO |
| Pulse extension | 5 ... 200 ms |
| Other parameters |
Sensitivity Error indicator Frequency switching |
Standards and certificates |
|---|
|
|
* Relates to a steel ball
Connection Diagram |
|---|
|
|
Mounting |
|---|
|
|
Ctrl. Panel |
|---|
|
17 = Sensitivity Adjustment
1c = Status display/setup aid 3a = Switching Status Indicator/Error Indicator 68 = supply voltage indicator 0b = Pulse length adjuster / for IRxF: additional calibration mode |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
M4 screw = 2.9 Nm
|
Product Highlights
This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
