FFXP007 Pressure Sensor

Usually ready to ship in 30 days after order is received.

Added to Your Cart:

Added to your request list:

UniBar pressure sensors measure the relative pressure in closed systems of any medium in the range -1...600 bar. UniBar pressure sensors are very easy to use thanks to the removable cover on the integrated display. The highly visible switching status display enables the rapid localization of affected sensors for maintenance processes. Thanks to the metallic sealing edge on the process connection, no further seals are required.

Features at a Glance

Piggable with flush mounting
Space-saving process connection thanks to small pressure membrane
Hygienic design makes it easy to clean
Robust stainless steel housing with IP69K
FDA compliant

Technical data

Sensor-specific data
Measuring Range	0 ... 100 bar
Measurement Type	relative
Maximum overload pressure	200 bar
Bursting pressure	400 bar
Setting Range	4 ... 100 %
Medium	Liquids, gases
Switching Hysteresis	2 %
Measuring error	< ± 0.5 %
Temperature Drift	0.025 %/K

Environmental conditions
Temperature of medium	-25 ... 60 °C
Ambient temperature	-25 ... 80 °C
EMC	DIN EN 61326-2-3
Shock resistance per DIN IEC 68-2-27	30 g / 11 ms
Vibration resistance per DIN IEC 60068-2-6	20 g (10...2000 Hz)

Electrical Data
Supply Voltage	16 ... 32 V DC
Current Consumption (Ub = 24 V)	< 60 mA
Number of Switching Outputs	1
Response Time	1.2 s
Switching Output/Switching Current	< 250 mA
Switching Output Voltage Drop	< 2 V
Analog Output	4...20 mA
Signal source	Pressure
Resolution	10 bit
Current Output Load Resistance	< 500 Ohm
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Protection Class	III

Mechanical Data
Setting Method	Menu
Housing Material	Stainless steel, V4A (1.4404 / 316L) Plastic, PC
Material Control Panel	Polyester
Material in contact with media	Stainless steel, V4A (1.4404 / 316L) Stainless steel, V4A (1.4435/316L)
Degree of Protection	IP67/IP69K *
Connection	M12 × 1; 4-pin
Process Connection	G 1/2" CIP-capable
Weight	750 g