text.skipToContent text.skipToNavigation

P1KY001 Laser Distance Sensor Time of Flight

Available from stock
These miniature sensors determine distance between the sensor and the object by means of transit time measurement. wenglor's interference-free technology (wintec) is revolutionizing sensor technology: it prevents numerous sensors arranged directly opposite or next to each other from interfering with one another. The sensors reach a very high switching frequency and use laser class 1, which is safe for the human eye.

Optical Data

Working Range 0 ... 1,000 mm
Setting Range 100 ... 1,000 mm
Switching Hysteresis  < 20 mm
Light Source Laser (red)
Wavelength 680 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 1
Beam Divergence < 16 mrad
Max. Ambient Light 10,000 Lux
Light Spot Diameter see Table 1
Triple Dot Laser yes
Reflector required no

Electrical Data

Supply Voltage 10 ... 30 V DC
Current Consumption (Ub = 24 V) < 30 mA
Switching Frequency 1,000 Hz
Response Time 0.5 ms
Temperature Drift < 2.5 %
Temperature Range -40 ... 50 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III
FDA Accession Number 1620293-001

Mechanical Data

Setting Method Potentiometer
Housing Material Plastic, ABS/PC
Plastic, PC
Optic Cover Plastic, PMMA
Degree of Protection IP67
Connection M8 × 1; 4-pin
Weight 8 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 996.97 a

Output

PNP NC, PNP NO yes

Adjustable parameters

Circuit NC
NO
NC+NO
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Table 1

Working Distance 100 mm 500 mm 1000 mm
Light Spot Diameter 4 mm 7 mm 15 mm

Connection Diagram

Switching Distance Deviation

Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
black 6 % remission
grey 18 % remission

Ctrl. Panel

68 = supply voltage indicator
05 = Switching Distance Adjuster
30 = Switching Status/Contamination Warning

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode 2 = Receiver Diode Screw M3 = 0,5 Nm

Complementary Products

  • PNP-NPN Converter BG7V1P-N-2M
Initial start-up instructions
Operating instructions
Quick-start guide
Declarations of Conformity / Approvals

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison