text.skipToContent text.skipToNavigation

YH08NCT8 Fork Sensor

Available from stock
The transmitter and the receiver are integrated into a single housing as a light barrier. If the active light beam between the transmitter and the receiver is interrupted, the output is switched accordingly. Thanks to the use of visible laser light, the sensor is very easy to align to the object. The use of a fine light beam ensures a small diameter spot over the entire width of the fork. This allows for the recognition of extremly small parts, holes, slots and notches.

Optical Data

Fork Width 80 mm
Smallest Recognizable Part 40 µm
Smallest Detectable Gap 50 µm
Switching Hysteresis  < 20 µm
Light Source Laser (red)
Wavelength 655 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 1
Max. Ambient Light 10,000 Lux
Light Spot Diameter 0.6 mm
Repeat Accuracy < 5 µm

Electrical Data

Supply Voltage 10 ... 30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Switching Frequency 10 kHz
Response Time 50 µs
Off-Delay 0 ... 100 ms
Temperature Range -25 ... 60 °C
Switching Output Voltage Drop < 1.5 V
NPN Switching Output/Switching Current 200 mA
Internal Load Switching Output 5,100 Ohm
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Teach Mode NT, MT
Protection Class III
FDA Accession Number 0820592-000

Mechanical Data

Setting Method Teach-In
Housing Material Plastic, PA
Steel, nickel-plated
Optic Cover Plastic, PC
Full Encapsulation yes
Degree of Protection IP67
Connection M8 × 1; 3-pin
Weight 130 g

Safety-relevant Data

MTTFd (EN ISO 13849-1) 1,436.4 a

Output

NPN NO yes

Adjustable parameters

Circuit NC
NC/NO
NO
All other parameters can be found in the product documentation.

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Connection Diagram

Ctrl. Panel

02 = Contamination Warning
01 = Switching Status Indicator
07 = Selector Switch
06 = Teach Button

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")
Screw M4 = 1 Nm
Product Comparison