ODX202P0007 Fiber-optic amplifier

Available from stock

Added to Your Cart:

Added to your request list:

wenglor fiber-optic cables are connected to these sensors. The easy to use teach-in function allows for fine sensor adjustment, so that even transparent objects can be reliably recognized in through-beam mode operation. The scanning width is automatically adapted to each individual application via external teach-in. The sensors can be easily mounted to standard DIN rails.

Features at a Glance

Recognition of transparent objects
Large detection and working range
Reflex and through-beam operation mode are possible
External teach-in
Key potentiometer, teach-in
Mount for fiber optic cable adapter 3

Technical data

Optical Data
Switching Hysteresis	< 15 %
Light Source	Red Light
Wavelength	660 nm
Service Life (T = +25 °C)	100,000 h
Max. Ambient Light	10,000 Lux

Electrical Data
Supply Voltage	10 ... 30 V DC
Current Consumption (Ub = 24 V)	< 40 mA
Switching Frequency	2 kHz
Response Time	250 µs
On-/Off-Delay	0 ... 200 ms
Temperature Drift	< 10 %
Temperature Range	-25 ... 60 °C
Switching Output Voltage Drop	< 2.5 V
Switching Output/Switching Current	200 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Teach Mode	NT, MT, ZT, DT, TP
Protection Class	III

Mechanical Data
Setting Method	Teach-In
Housing Material	Plastic, PBT
Full Encapsulation	yes
Degree of Protection	IP65
Connection	M8 × 1; 4-pin
DIN-Rail mounting	35 mm
Weight	25 g