text.skipToContent text.skipToNavigation
  • High homogeneity
  • No external control required
  • High performance: high intensity even in continuous mode
  • Easy and flexible installation

LFDI302 Flat Dome Light Infrared, 400 × 300 mm

available from stock
wenglor LFD flat dome lights are highly diffuse lighting containing a camera port. They are perfectly suited for large area applications such as robotic pick and place due to intense luminous flux and high homogeneity. They can be operated in continuous mode or synchronized to the digital camera in strobe mode using PNP or NPN inputs. The lighting is highly homogenous with very small borders (4 mm), making the usable area very large and integration very simple – part in thanks to T-slot mounting and anchor point around the entire perimeter of the product. Easily pair the camera and lighting with dedicated camera mounting points on the back of the lighting. The housing is constructed like an LED flat light with a camera hole in the center that is used to position a camera.

Optical Data

Light Source Infrared Light
Wavelength 850 nm
Risk Group (EN 62471) 1
Light output ≤ 45,000 Lux

Electrical Data

Supply Voltage 24 V DC
Power 82.56 W
Current Consumption Continuous Mode (Ub = 24 V) 3.44 A
Duty cycle 15 µs
Fall time 10 µs
Input signal PNP/NPN
Temperature Range -10 ... 40 °C
Storage temperature -20 ... 60 °C
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III
Dimming 0....10 V ≙ 100...30%
Overdrive no

Mechanical Data

Luminous Field Length (L) 400 mm
Luminous Field Width (W) 300 mm
Luminous Field 400 × 300 mm
Housing Material Aluminum, fiberglass-reinforced ABS
Degree of Protection IP40
Optic Cover PMMA (diffuse)
Connection M12 × 1; 5-pin
Max. cable lenght 10 m
Camera aperture inner diameter 65 mm


Operating modes Continuous, Strobe

Standards and certificates

B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf B_SYM_CE_01.pdf

Illumination methods

Connection Diagram

Ctrl. Panel

68 = supply voltage indicator
9b = Strobe Mode Indicator

Dimensioned Picture

Dimensions specified in mm (1 mm = 0.03937")

Complementary Products

  • Mounting bracket ZBBX001
Operating instructions
Declarations of Conformity / Approvals

World of Innovations

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.
Product Comparison