text.skipToContent text.skipToNavigation

Separation of Plastic Injection-Molded Parts Via Reflex Light Barrier 1

Separation of Plastic Injection-Molded Parts Via Reflex Light Barrier 2

Separation of Plastic Injection-Molded Parts Via Reflex Light Barrier 3

Separation of Plastic Injection-Molded Parts Via Reflex Light Barrier

Plastic injection-molded parts are produced in large quantities. Before they are packed, the plastic parts must be separated and fed to the packaging station via a conveyor rail. A reflex light barrier is taught in on the metal conveyor rail and then detects the presence of a plastic part. A flap is then opened, causing the object to fall into the packaging. The reflex light barrier detects objects regardless of their surface. This ensures that there is a plastic part in each package.

Reflex Light Barriers

Reflex light barriers detect and control objects by evaluating the signal strength and the principle of angle measurement. Thanks to the dynamic readjustment of the switching threshold, dirt and temperature can be compensated. Teach-in enables even transparent objects with a defined background to be recognized without additional reflectors.

Matching Products

The products listed here are ideal for use in this application.

P1PM101 Reflex Light Barrier

Range 1000 mm Speed 900 Hz Teach Mode static background Output PNP Circuit NO

Added to your request list:

P1PM102 Reflex Light Barrier

Range 1000 mm Speed 900 Hz Teach Mode static background Output NPN Circuit NO

Added to your request list:

P1MM001 Reflex Light Barrier

Range 500 mm Speed 500 Hz Teach Mode HT Output PNP Circuit NO

Added to your request list:

Added to Your Cart:

Product Highlights

This area provides a deeper insight into this product world. All information about new product series as well as tutorials, templates and much more are combined here and are clearly prepared – tangible, understandable and traceable. Everything at a glance.