Features at a Glance
- Simple installation
- Flexible alignment options
- Mounting on aluminum profiles
ZVZZ001 Mounting for camera or code scanner
Available from stock
Added to Your Cart:
This mounting enables the correct mounting of an imaging sensor (camera or code scanner) on aluminum profiles. The system can be rotated 180° on the vertical plane and 360° on the horizontal plane.
Mechanical Data | |
|---|---|
| Mounting type, device-side | Screwable with slot nut |
| Mounting type, system-side | Aluminum profile |
| Material | Aluminum, anodised |
| Weight | 88 g |
General Data | |
|---|---|
| Scope of delivery | 1 × mounting system, 2 × screws M5×14, 2 × screws M4×8, 1 × screw M3×6, 1 × setscrew M3×4, 1× locking pin 3×8 |
| Packaging unit | 1 Piece |
Standards and certificates |
|---|
|
|
Exploded view |
|---|
|
|
| Assembly note |
|---|
|
Fasten 2 × M5 × 14 mm screws to the aluminum profile using 2 slot nuts (not included in the scope of delivery).
Use screws or pins to fix the mounting bracket.
|
| Sample combination with ZMRX001 |
|---|
|
|
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = B60, B50
2 = BBZK
3 = C5PC
|
