Features at a Glance
- Analog output (0...10 V/4...20 mA)
- Scratch-resistant optic cover
- Emitted light disengageable
- Graphical display for easy operation
Y1TA100MHT88S762 Laser Distance Sensor Time of Flight
These sensors measure the distance between the sensor and the object. They function in accordance with the principle of transit time measurement. For this reason, the object´s color, shape and surface characteristics have practically no influence on measurement results. Even dark objects can be reliably recognized against bright backgrounds. Large working ranges and distances are achieved by these sensors. They are aligned directly to the object.
Optical Data | |
|---|---|
| Working Range | 0.1 ... 10.1 m |
| Measuring Range | 10 m |
| Resolution | 1 ... 10 mm |
| Linearity | 0.2 % |
| Linearity Deviation | 20 mm |
| Switching Hysteresis | 3 ... 20 mm |
| Light Source | Laser (red) |
| Wavelength | 660 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 2 |
| Max. Ambient Light | 10,000 Lux |
| Beam Divergence | < 2 mrad |
| Reflector required | no |
Electrical Data | |
|---|---|
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 100 mA |
| Measuring Rate | 1 ... 100 /s |
| On-/Off-Delay | 0 ... 10,000 ms |
| Temperature Drift | 0.25 mm/K |
| Temperature Range | -10 ... 60 °C |
| Number of Switching Outputs | 1 |
| Switching Output Voltage Drop | < 2.5 V |
| Switching Output/Switching Current | 200 mA |
| Error Output/Switching Current | 200 mA |
| Analog Output | 0...10 V |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | RS-232 |
| Protection Class | III |
| FDA Accession Number | 0710891-002 |
Mechanical Data | |
|---|---|
| Setting Method | Menu (OLED) |
| Housing Material | Plastic |
| Degree of Protection | IP68 |
| Connection | M12 × 1; 8-pin |
| Weight | 86 g |
Safety-relevant Data | |
|---|---|
| MTTFd (EN ISO 13849-1) | 345.73 a |
General Data | |
|---|---|
| Scope of delivery |
1 × BEF-SET-34 mounting set 1 × initial start-up instructions 1 × sensor |
Output | |
|---|---|
| Error Output | yes |
| PNP NO | yes |
| Analog Output | yes |
| RS-232 Interface | yes |
| External teach-in input | yes |
Adjustable parameters | |
|---|---|
| Analog output |
0...10 V 4...20 mA |
| Output |
Analog Output Error Output Push-pull NPN PNP |
| All other parameters can be found in the product documentation. |
Standards and certificates |
|---|
|
|
Display brightness may decrease with age. This does not result in any impairment of the sensor function.
Table 1 |
||
|---|---|---|
| Working Distance | 0 m | 10 m |
| Light Spot Diameter | 5 mm | < 20 mm |
Connection Diagram |
|---|
|
|
Ctrl. Panel |
|---|
|
21 = Mode Button
60 = display |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M4 = 0.5 Nm
|
Complementary Products |
|---|
|
ECAD data
