Features at a Glance
- Smallest recognizable distance difference: 100 µm
- Spot diameter: 0,3 mm
OHP551B0003 Capteur de distance laser à triangulation
Available from stock
Added to Your Cart:
Ces capteurs déterminent l'écart par une mesure d'angle. Ils sont capables de particulièrement bien identifier des objets devant chaque arrière-plan. La forme, la couleur ou la surface de l'objet à détecter n'ont pratiquement aucune influence sur le seuil de commutation du détecteur.
This product has been discontinued, but is still available as a spare part.
Optical Data |
|
|---|---|
| Range | 55 mm |
| Setting Range | 45 ... 55 mm |
| Switching Hysteresis | < 100 µm |
| Light Source | Laser, red |
| Wavelength | 660 nm |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | < 0.3 mm |
| Focus Distance | 75 mm |
Electrical Data |
|
|---|---|
| Supply Voltage | 10 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Switching Frequency | 800 Hz |
| Response Time | 650 µs |
| Temperature Drift | < 5 µm/K |
| Temperature Range | -25 ... 60 °C |
| Switching Output Voltage Drop | < 2.5 V |
| PNP Switching Output/Switching Current | 200 mA |
| PNP Contamination Output/Switching Current | 50 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
| FDA Accession Number | 1120738-000 |
Mechanical Data |
|
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, PBT |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection Type | Plug variant |
| Connection | M12 × 1; 4-pin |
| Optic Cover | Glass |
| Weight | 94 g |
General Data |
|
|---|---|
| Scope of delivery |
1 × initial start-up instructions 1 × sensor |
Output |
|
|---|---|
| Contamination Output | yes |
| PNP NO | yes |
Standards and certificates |
|---|
|
|
Connection Diagram |
|---|
|
|
Switching Distance Deviation |
|---|
|
Typical characteristic curve based on white, 90 % remission
Sr = Switching Distance
dSr = Switching Distance Change
 black 6 % remission grey 18 % remission |
Ctrl. Panel |
|---|
|
01 = Switching Status Indicator
32 = Contamination Warning/Error Warning 05 = Switching Distance Adjuster |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
1 = Transmitter Diode
2 = Receiver Diode
Screw M4 = 1 Nm
|
Complementary Products |
|---|
|
ECAD data
