Features at a Glance
- Teach-in, external teach-in
- AND-OR logic
- Cascadable
- Master-slave operating mode
LV250PCTS896 Control Unit for Through-Beam Sensors
Available from stock
Added to Your Cart:
This controller for SA250/EA250 through-beam sensors excludes any possibility of reciprocal influence. These devices are designed for harsh industrial environments.
Optical Data | |
|---|---|
| Range | 25,000 mm |
Electrical Data | |
|---|---|
| Sensor Type | Control unit |
| Supply Voltage | 18 ... 30 V |
| Current Consumption (Ub = 24 V) | 120 mA |
| Switching Frequency | 250 Hz |
| Response Time | 4 ms |
| On-/Off-Delay | 50 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25 ... 60 °C |
| Switching Output Voltage Drop | < 2.5 V |
| Switching Output/Switching Current | 200 mA |
| Error Output/Switching Current | 200 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | NT, MT |
| cascadable | yes |
| Logic Output | AND / OR |
| External teach-in input | yes |
| Protection Class | III |
Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material | Plastic |
| Degree of Protection | IP20 |
| DIN-Rail mounting | 35 mm |
| Weight | 201 g |
Output | |
|---|---|
| PNP NO/NC switchable | yes |
Standards and certificates |
|---|
|
|
Ctrl. Panel |
|---|
|
35 = Logic Status Indicator
36 = Mode Indicator 01 = Switching Status Indicator 03 = Error Indicator 07 = Selector Switch 06 = Teach Button |
Dimensioned Picture |
|---|
|
Dimensions specified in mm (1 mm = 0.03937")
|
